« previous next »
Pages: [1] 2

Author Topic: Warbow Arrows  (Read 14274 times)

0 Members and 1 Guest are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
Warbow Arrows
« on: November 05, 2012, 06:13:10 pm »
These are some heavy arrows I've finished for a friend for Xmas. His wife ordered them for him.

1/2" oak shafts, 32" from valley of nock to base of head, 7 1/2" hand cut fletchings, bound 4 wraps per inch with black silk. Heavy war heads are hand forged by Hector Cole in the UK. All heads weigh 28 - 30g. These are parallel for the first 2/3, and then evenly hand tapered to 3/8" at the nock. 2" horn inserts in the nocks. The horn is 1/8" wide to aid in release from the 120+# bow these will be shot out of. Nocks are 1/8" wide, and 3/8" deep. These arrows all qualify as 1/4# (113g) arrows for EWBS or CWBS sanctioned shoots.
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Warbow Arrows
« Reply #1 on: November 05, 2012, 06:30:51 pm »
wow, those are some nice arrows, where did you get or how did you make the shafts?
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Josh Wilson

  • Member
  • Posts: 46
Re: Warbow Arrows
« Reply #2 on: November 05, 2012, 08:24:42 pm »
Nice!!
Logged

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Warbow Arrows
« Reply #3 on: November 05, 2012, 08:40:12 pm »
Wow, that thread wrap looks very even.  I struggle with that the most.  Beautiful arrows!

George
Logged
St Paul, TX

Offline Eastman

  • Member
  • Posts: 88
Re: Warbow Arrows
« Reply #4 on: November 10, 2012, 10:05:03 am »
Great craftsmanship!!
Logged
''The joy is great of him who strays, in shady woods on summer days, With eyes alert and muscles steady , His long-bow strung, his arrows ready''  -Maurice Thompson

Offline adb

  • Member
  • Posts: 5,339
Re: Warbow Arrows
« Reply #5 on: November 10, 2012, 10:53:00 am »
Thanks! These are very labour intensive to make... each one takes about 2-3 hrs to complete from start to finish.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Warbow Arrows
« Reply #6 on: November 10, 2012, 01:23:25 pm »
Very nice...
Dunno how you have the patience for that spiral thread. How on earth do you know where to pull it down through the vanes of the feather? Or do you get all the vanes standing up straight or maybe thread it though on a needle?
Making arrows isn't my fave'
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Loki

  • Member
  • Posts: 381
Re: Warbow Arrows
« Reply #7 on: November 10, 2012, 01:59:40 pm »
Nice arrows! Are they bobtailed?

Quote
How on earth do you know where to pull it down through the vanes of the feather? Or do you get all the vanes standing up straight or maybe thread it though on a needle?

Dunno about Adb but I just use use the thread to seperate the vanes, I try for four turns per inch of flight.
Logged
Durham,England

Offline adb

  • Member
  • Posts: 5,339
Re: Warbow Arrows
« Reply #8 on: November 10, 2012, 03:52:04 pm »
Yup, that's how I do it too. I use the thread to seperate the feather, and then smooth it back together with my fingers. With a bit of practice, it gets easier. It's also not difficult to achieve even spacing after a while, too.
Logged

Offline Ian.

  • Member
  • Posts: 470
Re: Warbow Arrows
« Reply #9 on: November 10, 2012, 04:42:54 pm »
Nice looking arrows those - though, "qualify for EWBS/CWBS shoots" the 1/4 arrow has a rear edge as nature intended.
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline adb

  • Member
  • Posts: 5,339
Re: Warbow Arrows
« Reply #10 on: November 10, 2012, 05:52:38 pm »
Yes, I know. Sorry, I neglected to mention that small detail! However, the customer is unlikely to ever enter a EWBS or CWBS shoot, and he wanted the trailing edge less tapered.
« Last Edit: November 12, 2012, 11:42:36 am by adb »
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Warbow Arrows
« Reply #11 on: November 12, 2012, 11:13:41 am »
Quote from: Ian. on November 10, 2012, 04:42:54 pm
Nice looking arrows those - though, "qualify for EWBS/CWBS shoots" the 1/4 arrow has a rear edge as nature intended.
Kinda like this?
Logged

Offline robby

  • Member
  • Posts: 116
Re: Warbow Arrows
« Reply #12 on: November 15, 2012, 10:02:39 am »
Beautiful job, end to end!!!
Robby
Logged

Offline Agincourtwarbow

  • Member
  • Posts: 49
  • CWBS Chairman
    • The Canadian Warbow Society
Re: Warbow Arrows
« Reply #13 on: November 17, 2012, 02:14:09 pm »
Nice work mate, they look to be real well made battle shafts, bet they will fly well.
Logged

Offline imar

  • Member
  • Posts: 9
  • DWS; Dutch Warbow Society
Re: Warbow Arrows
« Reply #14 on: November 17, 2012, 03:25:27 pm »
Nice!

I would wrap some thread around the base of the nock too, for safety.
We do shoot these, and other, war arrows in the Dutch Warbow Society and sometimes they splice despite the horn.

Imar
Logged
Imar
DWS; Dutch Warbow Society
Pages: [1] 2
« previous next »