« previous next »
Pages: [1]

Author Topic: Spring clamps for glue up?  (Read 4072 times)

0 Members and 1 Guest are viewing this topic.

Offline vyadha

  • Member
  • Posts: 71
Spring clamps for glue up?
« on: November 05, 2012, 05:13:05 pm »
I found 20 spring clamps in my garage. Would these be alright for glue ups with epoxy and tb3 or will it starve the joint?
Logged

Offline vyadha

  • Member
  • Posts: 71
Re: Spring clamps for glue up?
« Reply #1 on: November 05, 2012, 09:03:08 pm »
Well i glued up some handles so we'll see. Ive never used spring clamps so im a bit tentative.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Spring clamps for glue up?
« Reply #2 on: November 05, 2012, 09:50:38 pm »
I don't use any sort of clamp for glue ups anymore. Bicycle tire inner tubes only. 27" X 1" work the best for me. I just cut out the valve. This provides the most even pressure throughout and are dirt cheap.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Spring clamps for glue up?
« Reply #3 on: November 06, 2012, 04:17:24 am »
as long as they are good clamps they will work, i use them to glue on handles and tips but used to use them for everything, use tubes now, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »