« previous next »
Pages: [1] 2

Author Topic: boo backed epe redux  (Read 4488 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
boo backed epe redux
« on: November 02, 2012, 05:49:39 pm »
this is a bow that had some problems, started out 72" ttt, lifted a sliver at the nock and had a partial delam on the other end, so i figured what the heck worked some glue into the partial delam and wrapped it up, after a week i cut both ends off, sanded the backing flat on the ends and glued on some walnut, shaped the reflex in and glued on tip overlays, started out 60#@29" and after retillering it's 63" ntn and 74#@29", hope ya like her, Bub



Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline sharpend60

  • Member
  • Posts: 355
Re: boo backed epe redux
« Reply #1 on: November 02, 2012, 05:57:26 pm »
I like it.

And what I like most is the strife.

The agony of defeat...

And the glory of victory!

A battle hard fought is something to be cherished.
You're gonna remember this one...
Logged

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: boo backed epe redux
« Reply #2 on: November 02, 2012, 06:04:09 pm »
That sure is some draw weight :o what is your ratio of ipe to boo on the working part of the Limbs? I have got 1 I've been want to start working on with just a sliver a bamboo on the back... makes me a little nervous that small amount that I have
Logged
Is this bow making a sickness? or the cure...

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: boo backed epe redux
« Reply #3 on: November 02, 2012, 06:11:07 pm »
Nice save, Bub!! ;)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline bubby

  • Member
  • Posts: 11,054
Re: boo backed epe redux
« Reply #4 on: November 02, 2012, 06:27:09 pm »
thank's guy's yeah the thrill of victory, defeat blows
soy it's 1 1/8" wide most of the wat tapers to 1/2" or so, epe at the fades 7/16" at just below where i flatened the boo 1/4" and the boo averages 1/8" or under, the wraps are on it because i had a questionable spot on the boo and it needed a wrap for piece of mind and i put the rest on to balance out the look, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline sharpend60

  • Member
  • Posts: 355
Re: boo backed epe redux
« Reply #5 on: November 02, 2012, 06:43:47 pm »
Quote from: bubby on November 02, 2012, 06:27:09 pm
thank's guy's yeah the thrill of victory, defeat blows

I gotta say this made me laugh out loud.

I am not fond stories that start with a 6" osage log, a boring ole ring chase and 66", safe, long bow.
Break more bows, screw up more often and then make better bows.
Logged

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: boo backed epe redux
« Reply #6 on: November 02, 2012, 07:49:42 pm »
Wow Bub, that'd be a great bow if you tried to make it at the beginning...doubly great to recover to it.  You're the real deal, I could not get that back.  Good luck keeping an arrow in a deer out of that bow. ;)

George
Logged
St Paul, TX

Offline spyder1958

  • Member
  • Posts: 239
  • Retire Air Force, love all outdoors, 7 grandkids
Re: boo backed epe redux
« Reply #7 on: November 02, 2012, 08:25:41 pm »
Bub, That looks like a winner. Any advise on the build as I'll be starting several bows for the grandkids using the boo back Ipe.
Thanks Graylan
Logged

blackhawk

  • Guest
Re: boo backed epe redux
« Reply #8 on: November 02, 2012, 08:27:34 pm »
I'd say it came out better than what it was before....sweet..I like it n nice bend there bub ;)
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: boo backed epe redux
« Reply #9 on: November 02, 2012, 09:01:24 pm »
Damned nice bow there bubby, one question though......where the hell ya gonna find yerself a T-REX cause I know them western deer aint that tough >:D
rich
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: boo backed epe redux
« Reply #10 on: November 02, 2012, 09:19:31 pm »
Bub what kind of glue did you use I have some bamboo & ipe coming from tenbrook I hope mine comes out as nice as yours.
Rob
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: boo backed epe redux
« Reply #11 on: November 02, 2012, 09:42:30 pm »
sharpend glad i made ya laugh
george this bow is pretty close to the max on my draw weight
you got that right rich, i've seen 4x4 blacktail here that went 100#
rog all ya need is tb2 or 3, whatever you got
your right balckhawk, it shoot nice and smooth before but spits an arrow a hell of a lot faster now, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Starfire

  • Member
  • Posts: 37
    • Starfire Graphics
Re: boo backed epe redux
« Reply #12 on: November 02, 2012, 11:31:08 pm »
Such a nice clean simple line, I like it!
Logged
I work to live, not live to work

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: boo backed epe redux
« Reply #13 on: November 02, 2012, 11:31:31 pm »
Nice save bub, thats a pretty wood/boo color contrast and the bend is fantastic. I didn't see her at 72" long but gonna say I like her much better at 63" ntn. Imo 72" is to long unless your going to war with someone at the other end of the block, if it's war with the guy next door 63" will be fine at that distance. :)
Greg
Logged
I ain't broke but I'm badly bent.

Offline coaster500

  • Member
  • Posts: 1,741
Re: boo backed epe redux
« Reply #14 on: November 02, 2012, 11:46:37 pm »
Sweet shooter Bubby!!!! 

60 and 70# bows make my shoulder hurt before I pull em ;)
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)
Pages: [1] 2
« previous next »