« previous next »
Pages: [1]

Author Topic: How thin for Mollegabet stiff limbs  (Read 1208 times)

0 Members and 1 Guest are viewing this topic.

Offline Starfire

  • Member
  • Posts: 37
    • Starfire Graphics
How thin for Mollegabet stiff limbs
« on: October 28, 2012, 12:51:55 pm »
So for my second bow I'm working on a hickory mollegabet, looking do draw about #55, any guess as to how thin I can go with the non-working limbs?  I'm at just a hair over 1/2 inch at the tip and about .75 thick from back to belly.

Thanks for any insight!
Logged
I work to live, not live to work

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: How thin for Mollegabet stiff limbs
« Reply #1 on: October 28, 2012, 12:53:34 pm »
Id stay right there for now. How long are your levers?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: How thin for Mollegabet stiff limbs
« Reply #2 on: October 28, 2012, 12:58:28 pm »
Once you get the bow tillered out you can reduce the levers to where they just start to give a little. There is no reason to reduce them now.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Starfire

  • Member
  • Posts: 37
    • Starfire Graphics
Re: How thin for Mollegabet stiff limbs
« Reply #3 on: October 28, 2012, 01:15:07 pm »
Quote from: PEARL DRUMS on October 28, 2012, 12:53:34 pm
Id stay right there for now. How long are your levers?

About a foot.  I'll just leave them alone for now.

Thanks!
Logged
I work to live, not live to work
Pages: [1]
« previous next »