Author Topic: Leather thickness for plains style quiver?  (Read 2065 times)

0 Members and 2 Guests are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
Leather thickness for plains style quiver?
« on: October 22, 2012, 06:21:17 pm »
Hi guys,

I am planning on starting a plains style quiver, and am curious what weight leather I should get? I can get my hands on a 2.75 oz split, or can get some 4-6oz suede bison leather. Which would work better?


Jon

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: Leather thickness for plains style quiver?
« Reply #1 on: October 22, 2012, 06:47:04 pm »
I prefer thinner for a plains style quiver, so that when you bend over, the quiver is soft enough to push against your body and help hold the arrows in.  That being said, 2.75 oz is quite thin.  I believe 1 oz is equivalent to about 1/64 of an inch, so that leather would only be just over 1 /32" thick.  It would probably work ok, but might not be very durable in the long run. 

If I was you, I'd use around 4 oz.  Even 6 oz is probably ok to use. Some people like to use thicker leather so that the mouth of the quiver stays open when putting arrows back in.  But that also means the mouth is wide open when you bend over. :)

Offline bubby

  • Member
  • Posts: 11,054
Re: Leather thickness for plains style quiver?
« Reply #2 on: October 23, 2012, 02:27:11 am »
like Cam said, 4-5 oz. jon, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹