« previous next »
Pages: [1]

Author Topic: 5/16" red oak dowels  (Read 2415 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
5/16" red oak dowels
« on: October 29, 2012, 12:09:44 am »
The Lowes by my house sells 5/16 red oak dowels. Pretty good weight to them and I was thinking about trying to make some hunting arrows with them. Anybody have any luck using these with broadheads?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 5/16" red oak dowels
« Reply #1 on: October 29, 2012, 12:16:17 am »
They should work fine just be sure to get good, straight grain.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline carpentertimw

  • Member
  • Posts: 42
Re: 5/16" red oak dowels
« Reply #2 on: October 29, 2012, 10:34:37 am »
I use 3/8" oak and they are usually the right spine. :) But that could have something to do with it being a 90 pound bow! :)
Logged

Offline Adam

  • Member
  • Posts: 913
Re: 5/16" red oak dowels
« Reply #3 on: October 29, 2012, 12:51:50 pm »
I've had good luck with them provided there isn't grain runoff.  I haven't tried broadheads, but field points and blunts work well.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: 5/16" red oak dowels
« Reply #4 on: October 30, 2012, 01:55:44 am »
i've used them with great success, including broadheads, but i prefer 3/8" poplar, tighter grain and and i still get a good heavy arrow, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »