« previous next »
Pages: [1]

Author Topic: If I can make a spine tester for around 10 bucks...  (Read 1624 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
If I can make a spine tester for around 10 bucks...
« on: October 28, 2012, 10:49:06 am »
...Then why cant a company sell one for less than 200 bucks???
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Online Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: If I can make a spine tester for around 10 bucks...
« Reply #1 on: October 28, 2012, 12:17:11 pm »
Companies know that the public falls for marketing ploys. People are always looking for the easy way out and think if they pay more for something it will work better. They forgot however about us
folks that are part of the primitive archer mentality that like to make their own stuff or trade for it. You can make a very effective spine tester for next to nothing.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: If I can make a spine tester for around 10 bucks...
« Reply #2 on: October 28, 2012, 12:46:07 pm »
I spent $2 to make mine
Logged
I started out with nothin' and I still got most of it left

Offline mighty joe

  • Member
  • Posts: 23
Re: If I can make a spine tester for around 10 bucks...
« Reply #3 on: October 28, 2012, 01:20:31 pm »
is it documented on here somewhere? i'd like to have one myself
Logged
the only easy day was yesterday and that's how i like it.

Online Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: If I can make a spine tester for around 10 bucks...
« Reply #4 on: October 28, 2012, 02:07:14 pm »
Google "James Hill Spine Tester"!   I got the dial indicator for mine for $5 at Grizzly Tool Co.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mighty joe

  • Member
  • Posts: 23
Re: If I can make a spine tester for around 10 bucks...
« Reply #5 on: October 28, 2012, 04:08:22 pm »
wow, thanks.

this may be elementary but how do i figure what spine weight i need for my or any bow. is it directly related to the pull weight of the bow? say my bow is 50# at 28", do i need my arrows to be 50# spine
Logged
the only easy day was yesterday and that's how i like it.

Online Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: If I can make a spine tester for around 10 bucks...
« Reply #6 on: October 28, 2012, 09:13:32 pm »
Basically yes. There are a few different ways to achieve the right arrow for a 50#@28" bow but the spine tester will put you in the ballpark or closer. The James Hill site has a conversion table showing the relation between the deflection of the shaft and the spine of the arrow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mighty joe

  • Member
  • Posts: 23
Re: If I can make a spine tester for around 10 bucks...
« Reply #7 on: October 29, 2012, 12:44:13 am »
another question, my bow is 50# @ 28" but my actually draw is closer to 31" to 32" should i be looking for higher splined arrows?
Logged
the only easy day was yesterday and that's how i like it.
Pages: [1]
« previous next »