Author Topic: Best degreasing befor glue up?  (Read 3503 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: Best degreasing befor glue up?
« Reply #15 on: November 03, 2012, 03:29:04 pm »
Like most tropical hardwoods you may find lemonwood difficult to bend with heat if it is possible at all. You may have to kerf the tips and glue a bend into it.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline spyder1958

  • Member
  • Posts: 239
  • Retire Air Force, love all outdoors, 7 grandkids
Re: Best degreasing befor glue up?
« Reply #16 on: November 03, 2012, 04:03:01 pm »
Thanks Eric.
Thanks Pat. Well live and learn. I should have ask before heating the lemonwood. It had a little set and I wanted to put just a slight recurve. its a bow I pickup at the flee market and one grandson loved it, so after removing the old backing and before applying the new backing, I thought, what the heck, heat it. Well..... one limb went great, so I switched limbs and had major problem,  :o not one but two cracks, side to side. while crack was open I shot super glue in and closed it up. Not sure if I should add extra backing and wrap with sinew or trash. :-[