Author Topic: Ocean Spray Bow (Finely Done!)  (Read 11550 times)

0 Members and 1 Guest are viewing this topic.

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Ocean Spray Bow (Finely Done!)
« on: October 01, 2012, 09:19:34 pm »
Ok guys, i got the Ocean Spray bow completed! Actually it was 'done' for a while, i just needed to freshen up the tiller after it sat in my shop and dried out more, besides doing the handle and finish work. All in all, this was a very easy bow to make. It shoots very fast and smooth. My hay bales don't stand a chance  ;D I decided to leave the bark on because i think it looks cool, however it cracked off somewhere around the lower tips, so i had to take some off.

Stats:
70#25"
52" ttt
Came from 3/4" shoot

The first pic is of the bow when i had posted it in 'Ocean Spray Experiment.' The only changes that have been made are finish work and to the drawlength, back then it was lighter do to less drying time.
The secret of life is learning to make your own luck.

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Ocean Spray Bow (Finely Done!)
« Reply #1 on: October 01, 2012, 09:21:44 pm »
Some more pics:
The secret of life is learning to make your own luck.

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Ocean Spray Bow (Finely Done!)
« Reply #2 on: October 01, 2012, 09:23:58 pm »
Whoa nice bow! taken a lot of set, but still a nice bow!
Amo innectis arcus- I love crafting bows (latin)

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Ocean Spray Bow (Finely Done!)
« Reply #3 on: October 01, 2012, 09:28:12 pm »
Thanks muffin  ;)
It definitely did take a lot of set, (that's right after i shot about 100 arrows) However it does not effect the shooting at all, so i have left it alone. If it had been a sluggish shooter i definitely would have changed it, but it goes right through a tight, heavy bale, (probably a 75 pounder) so I don't have guilt  ;D
The secret of life is learning to make your own luck.

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Ocean Spray Bow (Finely Done!)
« Reply #4 on: October 01, 2012, 09:32:01 pm »
guess your right! i figure if its fast enough its fine, performance in speed isnt everything in fact its better to have a slower bow that shoots dead center of where you look.
Amo innectis arcus- I love crafting bows (latin)

Offline bow101

  • Member
  • Posts: 2,235
Re: Ocean Spray Bow (Finely Done!)
« Reply #5 on: October 01, 2012, 10:40:11 pm »
"Z" looks real nice, how long did you wait to dry out the Ocean spary..?  :)
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Ocean Spray Bow (Finely Done!)
« Reply #6 on: October 01, 2012, 10:53:17 pm »
I really like it. The tiller looks great, maybe the overall dimensions and the wood not being qutie dry when you first started pulling it contributed to the excessive set. If you had'nt shown the unbraced pic one would never had known. I think you did a great job on it and the bark on looks cool. Maybe next time you can wait till its fully cured. That will be a bow to see.   Danny
"You know a tree by the fruit it bears"   God

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Ocean Spray Bow (Finely Done!)
« Reply #7 on: October 01, 2012, 10:59:59 pm »
Nice lookin bow there Zion. Who cares if it's got some set! If it shoots fine, than shoot the snot out of it, and go make some meat with it.

Tattoo Dave
Rockford, MI

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Ocean Spray Bow (Finely Done!)
« Reply #8 on: October 02, 2012, 12:54:05 am »
Thanks people! Since this bow shoots really well i don't care about the set as i mentioned earlier, i don't tend to  fuss over aesthetics if it performs well. But i also understand that a bow with less set out-performs bows with more set, so i will experiment and clamp an OS blank into some reflex. We shall see what the difference is. I let this stick season about 8 or 9 months, but then again i am impatient and thinking about letting a stave sit for 2 years seems crazy to me, by then i would be a sophomore  ;D Maybe when i'm retired in 50+ years.  ;)

The secret of life is learning to make your own luck.

Offline randman

  • Member
  • Posts: 647
Re: Ocean Spray Bow (Finely Done!)
« Reply #9 on: October 02, 2012, 05:32:47 am »
WoW Z, that's a nice little shooter! Guess I don't need to tell you about OS, you've already done it ;D Os does take a little set but like you said it doesn't seem to affect the shooting too much. You'd be amazed what a heat treating would do to that thing. Doesn't look like you heat treated it already and it might surprise you how much of that set you can heat treat away. It will add poundage though and that thing is already 70lbs. I can't pull 70# today much less when I was your age. I hate it when the bark pops off too but I like the look of yours with the tips exposed. Great job!
« Last Edit: October 02, 2012, 05:36:51 am by randman »
Beauty is in the eye of the beer holder.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Ocean Spray Bow (Finely Done!)
« Reply #10 on: October 02, 2012, 07:59:54 am »
Very nice tiller and good looking bow, I doubt the set came from the tillering it looks to good it probably came for still not being dry enough,  I am sure it's a sweet shooting bow. Nice Job. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Ocean Spray Bow (Finely Done!)
« Reply #11 on: October 02, 2012, 10:01:26 am »
Nice bend, Zion! 8)
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline dmenzies1950

  • Member
  • Posts: 171
Re: Ocean Spray Bow (Finely Done!)
« Reply #12 on: October 02, 2012, 01:18:49 pm »
Zion, I love to see your posts! You turn out some mighty fine bows and at your age, amazing! I love to see you youngsters with so much zeal for this craft! Keep it up! It does us old guys good to see your work!

You must toss a lot of bales to shoot those 70# bows!         Dale
"His bow remained steady, his strong arms stayed limber, because of the hand of the Mighty One, the Shepherd, the Rock of Israel." Genesis 49:24

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Ocean Spray Bow (Finely Done!)
« Reply #13 on: October 02, 2012, 01:37:36 pm »
If you heat treat some reflex, that set will disappear.

Very nice bow! Bends real nice.
« Last Edit: October 02, 2012, 01:57:14 pm by Bryce (Pinecone) »
Clatskanie, Oregon

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Ocean Spray Bow (Finely Done!)
« Reply #14 on: October 02, 2012, 08:46:52 pm »
Thanks all  ;D

Dale, your right, i do buck some hay. I also wrestle so i need to work out a lot to stay in shape.

Bryce, on my next OS bows i intend to do that, both to see how much of a difference in shooting it makes and also to see how well i can heat-treat OS.

Thanks for your comments guys!
The secret of life is learning to make your own luck.