« previous next »
Pages: 1 2 [3]

Author Topic: DogWood bow  (Read 23696 times)

0 Members and 1 Guest are viewing this topic.

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: DogWood bow
« Reply #30 on: September 27, 2007, 09:20:30 am »
   I pulled this thread back up to say that the slow cast WAS a moisture problem. I had left this bow sit since the original post until last week. I got it out and was completely surprised.It now shoots a 600 grain arrow with more authority than i would of thought possible. It is now the fastest bow ive ever built. Just goes to show you not to doubt the advice ya receive on this site.
Logged
Steve Bennett

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: DogWood bow
« Reply #31 on: September 27, 2007, 09:37:22 am »
Glad to hear it,I have had the same thing happen with Hickory.Now you need to try and seal it more to keep as much out as possiable.Again fine lookig bow. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline david w.

  • Member
  • Posts: 1,823
Re: DogWood bow
« Reply #32 on: September 27, 2007, 09:45:54 am »
good work nice bow :)
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: DogWood bow
« Reply #33 on: September 27, 2007, 10:45:19 am »
Turtle, Just because the bow wood is dry, it still has to season or cure. This can take a year or more. In that time, a lot can happen with a wood bow.
  I have a nice, tall, straight flowering dogwood I will cut soon and look forward to giving it a try.   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

makete

  • Guest
Re: DogWood bow
« Reply #34 on: September 27, 2007, 01:13:10 pm »
Nice bow and good advice.
Logged

Offline gpw

  • Member
  • Posts: 149
Re: DogWood bow
« Reply #35 on: September 28, 2007, 09:27:34 am »
That's why we store our bows inside ,on a rack , up high , away from the floor/humidity...
Logged
Pages: 1 2 [3]
« previous next »