« previous next »
Pages: [1]

Author Topic: pyramid bow tiller  (Read 1668 times)

0 Members and 1 Guest are viewing this topic.

Offline BOWMAN53

  • Member
  • Posts: 2,238
pyramid bow tiller
« on: September 07, 2012, 06:37:43 pm »
How do you tiller a pyramid bow? I have heard different ways so i would like to find out the correct way.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: pyramid bow tiller
« Reply #1 on: September 07, 2012, 07:21:16 pm »
i use an even thickness to ruff mine out, and leave the tip's a little stiff, build yourself a tillering gizmo that will help, especially with a straight stave or a board, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: pyramid bow tiller
« Reply #2 on: September 07, 2012, 08:27:56 pm »
How thick do you make the limbs?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: pyramid bow tiller
« Reply #3 on: September 07, 2012, 08:39:52 pm »
for a 29" draw, 66" ttt, 1 3/4"w @ the fades, taper to half inch tip's, and just under a half inch thick to start, you can get up to a 60# bow with this and a good pc of white oak or hickory or hard maple
also 2" fades and 4" grip, good luck if ya need help dont hesitate, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline driftingrz

  • Member
  • Posts: 32
Re: pyramid bow tiller
« Reply #4 on: September 07, 2012, 09:04:21 pm »
I just finished up a redoak pyramid. 45lbs at 28". You have any good pictures showing how the tiller should look at full draw? Mines pretty even and shoots great. Just haven't seen many pyramids to compare. Circular or eliptical tiller?
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: pyramid bow tiller
« Reply #5 on: September 07, 2012, 09:05:00 pm »
Thank you, i appreciate the help.
Logged
Pages: [1]
« previous next »