« previous next »
Pages: [1]

Author Topic: Hickory backing - flat or vertical grain???  (Read 3205 times)

0 Members and 1 Guest are viewing this topic.

Offline Easternarcher

  • Member
  • Posts: 622
Hickory backing - flat or vertical grain???
« on: September 20, 2007, 10:42:17 am »
Which is best? Right now i'm using kinda quarter-sawn at a bias grain...they seem to hold well, but is vertical grain better? Does it impart any extra power to the bow?

Eastern.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hickory backing - flat or vertical grain???
« Reply #1 on: September 20, 2007, 10:46:17 am »
I prefer vertical and biased grain for backing. I feel it gives better zip over flat grain backings.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline snedeker

  • Member
  • Posts: 907
Re: Hickory backing - flat or vertical grain???
« Reply #2 on: September 20, 2007, 11:01:57 am »
With flat sawn with ring run offs, you can get splinters or breaks, Former just happened to be adn was very annoying.

Dave
Logged
Pages: [1]
« previous next »