« previous next »
Pages: [1] 2

Author Topic: Elm with a little bit-o-'curve  (Read 4774 times)

0 Members and 1 Guest are viewing this topic.

Offline JonW

  • Member
  • Posts: 1,906
Elm with a little bit-o-'curve
« on: August 25, 2012, 04:22:52 pm »
I really didn't like this piece of wood after I got the bow roughed out. It seemed kinda weak for its mass. I went ahead and kicked the tips a little and tillered it out. It came in at 48# @ 26" but I thought I would heat treat it a little to see what it would pick up in draw weight. I know this may be hard to believe but the bow picked up 14 lbs!! Now it pulls 62# @ 26". I think I will hunt with this bow some this year as it shoots really good. The bow is 62" NTN. I have a couple more staves from this tree and I will definately be heat treating those as well.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Elm with a little bit-o-'curve
« Reply #1 on: August 25, 2012, 04:25:28 pm »
Holy wah!  Ya nailed that tiller!  That bow should be a poster child for heat treating! 

Love the osage nocks, too.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Elm with a little bit-o-'curve
« Reply #2 on: August 25, 2012, 04:29:19 pm »
Gorgeous full draw. and the braced pic aint bad either. good job love that style
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Elm with a little bit-o-'curve
« Reply #3 on: August 25, 2012, 04:46:21 pm »
Nice job, Jon. What's that width...about 2 in.?
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: Elm with a little bit-o-'curve
« Reply #4 on: August 25, 2012, 04:55:04 pm »
Just had a similar experience with a piece of plum. Came in under weight 42 and overbuilt. I reduced tip mass, added recurve and heay treated the belly. Now she's pulling 50#, flat profile and launches an arrow. Heat

Great work on your bow.

Gabe
Logged
Humboldt County CA.

Offline TRACY

  • Member
  • Posts: 4,523
Re: Elm with a little bit-o-'curve
« Reply #5 on: August 25, 2012, 05:03:12 pm »
Man I'm liking that a whole lot! Heck of an increase with tempering too. I'd be proud to hunt with a bow like that.

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline JonW

  • Member
  • Posts: 1,906
Re: Elm with a little bit-o-'curve
« Reply #6 on: August 25, 2012, 05:09:42 pm »
Thanks guys. JW, I have made so many short bows that now I think everything I make comes out with a circular tiller :-\Kenny the bow is 1 7/8" at the fades. I have done some heat treating in the past on whitewoods but never had the results like I had with this bow.
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Elm with a little bit-o-'curve
« Reply #7 on: August 25, 2012, 05:25:55 pm »
That sure looks to be a killer to me Jon. Very nice tiller on that bow and those tips seem to have just the right amount of curve to them.
I like that bow from every angle, braced, unbraced and full draw. You made a dandy and I bet it's a smooth shooter too. Real nice!

Greg
Logged
I ain't broke but I'm badly bent.

Offline coaster500

  • Member
  • Posts: 1,741
Re: Elm with a little bit-o-'curve
« Reply #8 on: August 25, 2012, 08:50:47 pm »
Wow I'd say elm like the HEAT!!!!!

Sweet bender there :)
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

blackhawk

  • Guest
Re: Elm with a little bit-o-'curve
« Reply #9 on: August 25, 2012, 11:12:31 pm »
Sweet....some elm responds very well with heat treating and improves reduced set big time.how much reflex did you induce while tempering? If so,then that explains why you gained so much weight. Adding the reflex will gain you approx 3 pounds per inch. And flipping the tips increased your weight as well. Which explains the big weight gain.
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: Elm with a little bit-o-'curve
« Reply #10 on: August 25, 2012, 11:37:01 pm »
Jon, cant say nothin about the heat-treat or none of that other stuff. I have used a lot of Elm though, and that bow is as fine they come. I believe that elm is an underrated bow wood. Very nicely done sir!!!
rich
Logged

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Elm with a little bit-o-'curve
« Reply #11 on: August 25, 2012, 11:51:46 pm »
Thats one sweet bow Jon!! Nice work pal.

Tattoo Dave
Logged
Rockford, MI

Offline JonW

  • Member
  • Posts: 1,906
Re: Elm with a little bit-o-'curve
« Reply #12 on: August 26, 2012, 12:43:58 am »
Thanks Rich. I know you use a lot of Elm and I am liking it the more I use it.
Thanks Dave

Chris I didn't reflex it much at all. I just clamped it in the form I used to do the tips and heat treated it. It was fairly flat limbed to start. I flipped the tips initially before tillering. The gain was solely from the heating.
Logged

Offline Josh B

  • Member
  • Posts: 3,741
Re: Elm with a little bit-o-'curve
« Reply #13 on: August 26, 2012, 01:37:43 am »
That came out sweet!  Great tiller and the profile is very graceful.  Well done Sir!  Josh
Logged

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Elm with a little bit-o-'curve
« Reply #14 on: August 27, 2012, 05:03:33 am »
Fantastic.  Your tiller looks great.  I had a similar heat treating success with winged elm.  It picked up ten pounds just from the heat alone.   
Logged
Howard
Gautier, Mississippi
Pages: [1] 2
« previous next »