« previous next »
Pages: [1]

Author Topic: ipe boards  (Read 2129 times)

0 Members and 1 Guest are viewing this topic.

Offline shiraforge

  • Member
  • Posts: 13
ipe boards
« on: August 22, 2012, 10:58:27 pm »
I have some ipe deckboards, 3/4 by 3.5.  Will they work for making bows.
Logged

Offline okie64

  • Member
  • Posts: 1,134
Re: ipe boards
« Reply #1 on: August 22, 2012, 11:06:04 pm »
As long as they have straight grain and no knots they will work fine with a hickory or bamboo backing. Never tried one without a backing but Ive seen a few on here. Ipe is very dense wood and strong in compression.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: ipe boards
« Reply #2 on: August 22, 2012, 11:13:00 pm »
Yes. ;D
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: ipe boards
« Reply #3 on: August 22, 2012, 11:13:30 pm »
I made an ipe self bow once. Turned out sweet, and shoots great!

Tattoo Dave
Logged
Rockford, MI

Offline RobWiden

  • Member
  • Posts: 99
Re: ipe boards
« Reply #4 on: August 23, 2012, 01:30:25 pm »
    I only started using ipe this year, I love the stuff. I've been backing them with hickory and they make sweet bows. So nice I had to go back and get three more boards - enough for about twenty longbows.
Logged
If I knew what I was doing, I'd probably be bored with it, and I wouldn't be here.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: ipe boards
« Reply #5 on: August 23, 2012, 01:42:34 pm »
I have made three BBI's and never even considered studying the boards grain. I got the most from the board I could and made three bows. All shoot and one just got shot in last night.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

gutpile

  • Guest
Re: ipe boards
« Reply #6 on: August 23, 2012, 02:30:32 pm »
just make sure you wear a mask of some sort..very toxic dust..gut
Logged

Offline missilemaster

  • Member
  • Posts: 1,172
Re: ipe boards
« Reply #7 on: August 23, 2012, 11:57:38 pm »
The straighter the grain is, the further you can bend it into a glued up reflex without it splintering.
Logged
All men die,  few men ever really live.

Real men love Jesus.

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: ipe boards
« Reply #8 on: August 24, 2012, 05:48:06 am »
Avoid cross grain.

And try to pick a surfaced board. Unsurfaced boards of ipé tend to be nearly impossible to read the grain. A large knot could very well be hidden underneath the rough surface.

Also try to select a piece with high specific gravity. You can tell by the color (darker color tends to have higher SG), the sound when you tap the piece (higher 'ring' to it with higher SG) and workability. Bring a scraper to the lumberyard and see how easy it is to remove wood.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline jeffhalfrack

  • Member
  • Posts: 438
Re: ipe boards
« Reply #9 on: August 24, 2012, 05:01:17 pm »
I  have  a  question,,,what  would  a  64" hic  backed  flat bow stiff handle  lay out be???  I  have a  board  and never  tried  one  thanks  JeffW
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: ipe boards
« Reply #10 on: August 24, 2012, 07:00:29 pm »
1 1/4" wide and either straight taper to tips or go 2/3 before you taper to tip's, i've done both with success, but i prefer the latter, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »