« previous next »
Pages: [1]

Author Topic: Nock placement on a Recurve?  (Read 1065 times)

0 Members and 1 Guest are viewing this topic.

Offline Easternarcher

  • Member
  • Posts: 622
Nock placement on a Recurve?
« on: August 13, 2012, 01:36:15 pm »
I'm currently working on a recurve, and my slats were only 66in. to start with...
I have put recurves in my glueup (this was a boo-ipe laminate)the recurves will work abit too. I'm worried I do not have enough room for the nocks...assuming that I want to keep the ntn distance at 64in. This is for a 50-55lb bow @ 28".
I could move the nocks down the limb abit to get a 62in ntn, but I guess I'm wondering if I'm worrying over nothing? right now the nock grooves at the back side are 5/8-3/4" from the end of my tips. I will be gluing on an overlay of antler or possibly horn.
Any advise? Sorry I don't have pics right now.

Thanks
« Last Edit: August 13, 2012, 01:49:30 pm by Easternarcher »
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: Nock placement on a Recurve?
« Reply #1 on: August 13, 2012, 01:45:57 pm »
It really shouldn't matter,anything passed the string is just added weight or for looks.  :) I usuall only go an inch down to start and wind up taking some the end off anyway.That sounds about right to me. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »