Author Topic: While at work  (Read 1186 times)

0 Members and 1 Guest are viewing this topic.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
While at work
« on: August 08, 2012, 05:17:56 pm »
Well today we were jetting a well in and the screen was mudded off so that gave me most of the morning to knapp on the job hehe the well was only making about 20gpm so In between surging the well I broke a Harrell at the base when notching it :( but later I was trying to make a blade core so I can try to make small bladelits and doing so I made a good spall to play with it had a geo in it so first I tried to make a point around the geo well I started to see I was running out or room after I removed the massive bulb that was on it so I decided to create something usefull and this is what I ended up with a some what corner tang biface multi tool it can be a pocket skinner or a blunt bleeder for rodents :) and after I finished this cool tool the well came in Nicely making 150+ GPM



http://i1228.photobucket.com/albums/ee451/bloodmoonwidow/72c23389.mp4
« Last Edit: August 08, 2012, 05:21:26 pm by skyarrow »
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: While at work
« Reply #1 on: August 08, 2012, 06:17:17 pm »
Nice Material Sterling!  8) dpg
(:::.)    Osage music played daily. :)