Thanks for the Kind Words Gentlemen,
Bryce I agree with you, It could have used a little more bend in the Handle but I accidentally made it slightly narrower than I intended, So I decided to Keep the Bending in the Handle very very slight, only perceivable by feel to the archer.
Tom Sawyer your eyes do not lie, there are two very large scooped out areas in the bows working section. When I received the stave I Cursed the two large Bumps that were easily visible even with the Bark on. Beleive it or not I ended up using a Hammer and Chisel to scoop these sections out. My blood Pressure was off the charts while I did this as you can imagine. I then Tillered through that area using a small piece of a Belt Sander Belt and a great deal of patience. In the End I'm glad that the bow had those bumps because I love how they look now.
Killir Duck- It's 2.5 inches wide, very wide and very thin indeed.