Author Topic: New work bench  (Read 4638 times)

0 Members and 1 Guest are viewing this topic.

Offline LivingElemental

  • Member
  • Posts: 125
  • Appalachi/Wataugi/East Tennessee
New work bench
« on: July 14, 2012, 06:08:19 pm »
I'm destroying my back deck using my stairs and handrails to hold my staves while I shave them, so I'm planning on investing in a workbench or a shave horse, but I've never owned one before, so I don't know.

What is everyone else using?
Alzamaal illi yadour 'ala qurnayn fakhira, yarja' idhana maqtu'a.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: New work bench
« Reply #1 on: July 14, 2012, 06:28:50 pm »
I made myself a shave horse, highly recommended. Need a bench too for the later stages.

I've modified it a bit since this shot, I've put the seat on a skew so that the stave can pass under my left arm when I'm working near it's centre.
Del
Health warning, these posts may contain traces of nut.

Offline LivingElemental

  • Member
  • Posts: 125
  • Appalachi/Wataugi/East Tennessee
Re: New work bench
« Reply #2 on: July 14, 2012, 08:11:58 pm »
Never been much of a handyman. Anyone know of a good shave horse build-a-long?
Alzamaal illi yadour 'ala qurnayn fakhira, yarja' idhana maqtu'a.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: New work bench
« Reply #3 on: July 14, 2012, 09:04:32 pm »
Have you looked in the "How To" section?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline LivingElemental

  • Member
  • Posts: 125
  • Appalachi/Wataugi/East Tennessee
Re: New work bench
« Reply #4 on: July 14, 2012, 10:03:01 pm »
Never noticed it there before. I just started skimming through it. Thanks.
Alzamaal illi yadour 'ala qurnayn fakhira, yarja' idhana maqtu'a.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: New work bench
« Reply #5 on: July 14, 2012, 10:41:54 pm »
I made a traveling sit down bench with a vice on it not to long ago.  What I use every day is a small work bench with a good sized vice on it.   
I started out with nothin' and I still got most of it left

mikekeswick

  • Guest
Re: New work bench
« Reply #6 on: July 15, 2012, 05:27:33 am »
I can't get on with shaving horses and i've used a few different ones. I've even made a 'new' design where the stave is clamped using inner tubes and can be locked in place with a piece of wood so that you can move around it.
I don't think you can beat a nice sturdy bench with an engineers vice with 4 inch jaws which are padded with a little leather. Make your table higher than you think so you don't have to bend over at all when working on a bow. Use either wood or steel box section for the frame, 3/4 ply for the top and then rawl bolt it to a solid wall with some brackets so that it's completely immoveable. Perfect!

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: New work bench
« Reply #7 on: July 15, 2012, 06:15:50 am »
... Make your table higher than you think so you don't have to bend over at all when working on a bow. ...
Ain't that the truth!
Del
Health warning, these posts may contain traces of nut.

Offline sadiejane

  • Member
  • Posts: 1,030
Re: New work bench
« Reply #8 on: July 15, 2012, 12:01:59 pm »


wild women don't get the blues

Offline LivingElemental

  • Member
  • Posts: 125
  • Appalachi/Wataugi/East Tennessee
Re: New work bench
« Reply #9 on: July 15, 2012, 07:55:35 pm »
You don't mind if I copy either of your designs, do you?
Alzamaal illi yadour 'ala qurnayn fakhira, yarja' idhana maqtu'a.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: New work bench
« Reply #10 on: July 17, 2012, 12:59:04 am »
Del looks like the American stereotypical image of the "peculiar" Englishman...leather loafers, knit stocking cap, slacks!  Granted, I see the same thing...but then I catch myself studying the wood he has trapped in the bodger trying to see where he is in the process, whether there is anything I can steal for ideas, how he is addressing the wood with the tool.  Heck, I wanna be Del the Cat when I grow up.  Maybe that should be IF I grow up. 

In the last place I lived, I built a great workbench by going to the Habitat for Humanity Re-Store and buying a set of kitchen cabinets.  The base cabinets were set up on 4" of risers and had a countertop made of double thickness of 3/4 exterior grade plywood with a glued and dowelled hickory facing installed.  The wall cabinets fit over a sink and had a gap for a window where you would stare out wishing you weren't washing dishes.  That wall unit was hung up and a pegboard tool rack covered the space where the window would have been.  A flourescent light fixture was set in that space as well and three power outlets installed at the back of the bench.  The bench top also extended 3 inches out over the base cabinets so that clamping to the bench was a snap.  I wrote out all my math equations and doodled over it with pencil until it was covered.  I'd use my palm sander to clean it up and re-paint every few months.  Worked for me.
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: New work bench
« Reply #11 on: July 20, 2012, 07:20:15 am »
You don't mind if I copy either of your designs, do you?
No prob, there are better pics and a write up on my Bowyers Diary.
Just google to find it. The search on the Bowyers Diary actually works well ! :o
Del
@ JW.. If you look closely you'll see I'm using an invisible spokeshave! I just posed the pic for my blog and it was the first tool that came to hand ;D
Mind it's a great tool, I've never made a mistake using it, but the shavings are very very fine ;D
Health warning, these posts may contain traces of nut.

Offline sweeney3

  • Member
  • Posts: 277
Re: New work bench
« Reply #12 on: July 20, 2012, 12:01:55 pm »
The main thing I noticed in Del's picture is that he appears to be quite comfortable in a knit watch cap and sweater.  I would give one kidney and my remaining eye tooth for some cool, dank weather like that now.  It's hotter than furry **** in a wool sock down here right now.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: New work bench
« Reply #13 on: July 20, 2012, 04:53:49 pm »
It's hotter than furry **** in a wool sock down here right now.

I hear ya, buddy.  I work part time in an adult beverage shop...you can bet Del's invisible spokeshave I take my bloody time restocking the barleywater cooler!

There is a nice little picnic spot up Nemo Road in the Black Hills.  Lots of shade, a nice gurgling coldwater creek, barbecue grills, and these wonderful heavy picnic tables.  I take my gear up there now and then and work.  I always end up letting other people take a few licks with the tools and they are always fascinated.  It's the "outreach woodshop". 
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline LivingElemental

  • Member
  • Posts: 125
  • Appalachi/Wataugi/East Tennessee
Re: New work bench
« Reply #14 on: July 20, 2012, 05:36:43 pm »
To take one out of my dad's book, it's hotter than a four-balled tom cat down here this summer. I've been having to move my shop into the woods behind my house to avoid boiling alive.
Alzamaal illi yadour 'ala qurnayn fakhira, yarja' idhana maqtu'a.