« previous next »
Pages: [1]

Author Topic: New to Selfbow Building  (Read 2202 times)

0 Members and 3 Guests are viewing this topic.

Offline hunter255

  • Member
  • Posts: 27
New to Selfbow Building
« on: July 04, 2012, 11:09:53 am »
This is my first attempt building a selfbow. I have built bamboo backed, Board bows, Laminated bows but the selfbow is by far the most challenging to build. Here are a couple of photo's of the stave and rings. Please let me know which ring i should chase. I appreciate the help.   Thank you Steve




Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: New to Selfbow Building
« Reply #1 on: July 04, 2012, 11:29:54 am »
All of those rings look good to me.  That looks like a fine piece of osage.  Good luck with it.
Logged
I started out with nothin' and I still got most of it left

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: New to Selfbow Building
« Reply #2 on: July 04, 2012, 11:33:06 am »
Pick one and go for it.....they look good.  Just be very careful around knots.  Use a scraper there.  You will get they hang of it with the drawknife.  Take your time and don't be in a rush.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: New to Selfbow Building
« Reply #3 on: July 04, 2012, 11:45:55 am »
Yep.  They are all pretty similar looking.  Scrape away the top ring from end to end for practice.  Then the next one the same, and so on.  Stop at the point where you have one continuous ring, unviolated end to end.  Looks like a really good stave!
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

mikekeswick

  • Guest
Re: New to Selfbow Building
« Reply #4 on: July 04, 2012, 07:30:17 pm »
The same rules apply - even thickness and width tapers :) Easy.........
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,611
Re: New to Selfbow Building
« Reply #5 on: July 04, 2012, 09:01:09 pm »
I'd go to the first clean ring you can get to.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: New to Selfbow Building
« Reply #6 on: July 05, 2012, 01:35:44 am »
Nice piece! Take your pic start toward the top so if a woops occurs you can move down to the next...man have fun and keep is posted  ;)
Logged
Is this bow making a sickness? or the cure...

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: New to Selfbow Building
« Reply #7 on: July 05, 2012, 09:43:41 am »
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: New to Selfbow Building
« Reply #8 on: July 05, 2012, 04:12:48 pm »
That is a nice consistent stave from the looks of the end shown. I agree with everyone else that you could take your pick but if the stave is deep enough I'd shoot for what looks like the 5th late wood ring, the one just under the marks that look like dots in the pic. That choice might change depending on what the view from the sides and the other end look like.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline hunter255

  • Member
  • Posts: 27
Re: New to Selfbow Building
« Reply #9 on: July 06, 2012, 08:53:58 am »
Thanks Everybody. I stripped the bark off. Now go down a ring for practice.
Logged
Pages: [1]
« previous next »