« previous next »
Pages: [1] 2

Author Topic: Made some meat makers  (Read 16361 times)

0 Members and 1 Guest are viewing this topic.

Offline Kegan

  • Member
  • Posts: 2,676
Made some meat makers
« on: September 07, 2007, 07:58:51 pm »
Got some squirrel arrows done today. Foudn some shafting from Minuteman behind all my junk, so I figured to try 'em out. Don't remember what they are, but they work well :). Got a 5" ducttape two-fletch on 'em (outta feathers and bark). At 30" they're four inches longer than my draw, hopefully it help with accuracy (I need all the help I can get ;D). Just gave them slanted, fire hardened tips. Not the neatest, straightest, prettiest, or in any way best arrows- but most shoot straight and hard so I'm content :).

[attachment deleted by admin]
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: Made some meat makers
« Reply #1 on: September 07, 2007, 10:25:06 pm »
Way to improvise Kegan, look just fine to me.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Made some meat makers
« Reply #2 on: September 07, 2007, 10:28:18 pm »
Yep, that's modern day makin do ;D. Look like they aughta make meat, that's all that counts.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline possum

  • Member
  • Posts: 163
Re: Made some meat makers
« Reply #3 on: September 08, 2007, 08:44:43 am »
You might be a redneck if...

possum ;D
Logged
"To ensure peace, security, and happiness, the rifle and pistol are equally indispensable. The very atmosphere of firearms everywhere restrains evil interference - they deserve a place of honor with all that is good." George Washington


mebane NC

Offline lowell

  • Member
  • Posts: 939
Re: Made some meat makers
« Reply #4 on: September 08, 2007, 10:01:10 am »
Primitive man would have used duct tape too, if he'd had it !!! ;)


 
Logged
My son says I shoot a stick with a stick!!

Offline possum

  • Member
  • Posts: 163
Re: Made some meat makers
« Reply #5 on: September 08, 2007, 11:35:45 am »
Don't get me wrong, I love it.  I love the ingenuity even more.  But c'mon... it IS duct tape. ;) ::)

possum
Logged
"To ensure peace, security, and happiness, the rifle and pistol are equally indispensable. The very atmosphere of firearms everywhere restrains evil interference - they deserve a place of honor with all that is good." George Washington


mebane NC

Offline Kegan

  • Member
  • Posts: 2,676
Re: Made some meat makers
« Reply #6 on: September 08, 2007, 03:26:42 pm »
Woulda loved to use bark, but I'm out :P. Tried leaves for a few hours, but they kept getting torn up. So, I gave in and used duct tape. Didn't really wanna, as I wanted to keep 'em primitive, but I use steel to make my bows, a paracord string, sandpaper and a hacksaw on my other hunting arrows, and so I just to heck with it. All I know is those squirrels will taste all the same, duct tape or not ;).
Logged

jamie

  • Guest
Re: Made some meat makers
« Reply #7 on: September 08, 2007, 11:20:50 pm »
quick thinkin". fired hardened tips are very deadly. i was shooting 50 yrds at a tennins ball on a string. there is a plywood panel behind the target. the field tips barely stuck. the fire hardened tips were punching holes through the wood panel. they work
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: Made some meat makers
« Reply #8 on: September 09, 2007, 04:50:49 pm »
Quote from: jamie on September 08, 2007, 11:20:50 pm
quick thinkin". fired hardened tips are very deadly. i was shooting 50 yrds at a tennins ball on a string. there is a plywood panel behind the target. the field tips barely stuck. the fire hardened tips were punching holes through the wood panel. they work

I've had more blunts and other small game/practice points break off the shaft than I've had fire hardened tips split. And even when they do split a little glue and thread'll fix 'em right up :).
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Made some meat makers
« Reply #9 on: September 09, 2007, 09:57:28 pm »
Thats awsome ha ha ha duct tape I love it. That would be the best to get a trophy buck with duct tape arrows on a home made bow. Some guys spend thousands getting all set up. You spent like five bucks. too funny Im gonna try it.
                                                                                              Jesse
                                                                       
                                                               
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline John K

  • Member
  • Posts: 1,936
Re: Made some meat makers
« Reply #10 on: September 12, 2007, 04:18:07 pm »
Kegan, Red Green would be proud.  ;D
Logged
The only way to fail is to never start !

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Made some meat makers
« Reply #11 on: September 12, 2007, 04:22:40 pm »
"If the women don't find you handsome at least let them find you handy"  ;D    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Kegan

  • Member
  • Posts: 2,676
Re: Made some meat makers
« Reply #12 on: September 12, 2007, 05:43:34 pm »
I guess now all I have to do is turn an old car into a bow building machine and I'd be set ;).
Logged

Offline david w.

  • Member
  • Posts: 1,823
Re: Made some meat makers
« Reply #13 on: September 12, 2007, 07:00:41 pm »
those are awesome. teh duct tape is so cool. i might try that
Logged
These pretzels are making me thirsty.

if it dont go fast...chrome it - El Destructo

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Made some meat makers
« Reply #14 on: September 13, 2007, 12:33:16 am »
Using materials that are readily available is as primitive as it gets! ;)     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1] 2
« previous next »