Author Topic: Tiller check... UPDATE #3 !!!!!  (Read 2980 times)

0 Members and 1 Guest are viewing this topic.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: To brace or not to brace... UPDATE #2 !!!!!
« Reply #15 on: June 24, 2012, 07:47:48 pm »
Update number three.. Heat treated 4.5 " brace and drawn to 18"

First pic shows bow in the same orientation as previous pics... I think it looks pretty good with slightly too much bend near handle which I will work around and the left (bottom limb is still a little too stiff)... what do you all think? Input needed!

The second pic shows the bow turned around and shows the affect of the natural twist... It looks kinda bad.. besides weakening the right (bottom limb) limb in this pic, is there anything else you would do? Please help me out!

Jon