« previous next »
Pages: [1]

Author Topic: Small osage question  (Read 3462 times)

0 Members and 1 Guest are viewing this topic.

Offline bluegill

  • Member
  • Posts: 21
Small osage question
« on: September 06, 2007, 02:05:54 pm »
I have found a small osage about 3" in diameter which has good shape for a bow. I realize that there will be no heartwood, just sapwood. Is this suitable to make a bow out of?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Small osage question
« Reply #1 on: September 06, 2007, 02:20:44 pm »
I have made a few all sapwood osage bows with good results. Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Small osage question
« Reply #2 on: September 06, 2007, 03:15:49 pm »
I would not count on it being all sapwood.
Many Osage trees have only a 1/4" of sapwood.
Cant tell for sure until it is cut.

David
Logged
David Key / N.W. Alabama

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Small osage question
« Reply #3 on: September 06, 2007, 06:44:53 pm »
The wood should be fine. The back of your bow is going to be more round than flat, and chasing a growth could be a challenge.
Keep us posted.
Eric
Logged
" To be, or not to be"...decisions, decisions, decisions.
Pages: [1]
« previous next »