Author Topic: Help Please?... (Read 1615 times)

jermcramp1 · « **on:** June 14, 2012, 10:41:30 pm »

I found this GEM in my grandpas shed, I have never seen one of these before but I sure wish I had when I was smithing...

Anyone have any idea what you call it, where its made, and how much it might be worth?

Its rusty but everything works just fine.

I know some of you slightly cured and mellowed gents have seen these before...

Gus · « **Reply #1 on:** June 14, 2012, 11:42:57 pm »

Brother that's a Beauty!

See if this matches your Blacksmith Vice Anvil.

1914 ADJUSTABLE BLACKSMITH VISE ANVIL.
Overall length is about 23" (closed), overall height is about 8", the jaws are 3 3/4" wide, weight is about 45 pounds . The anvil has a 3/4" square Hardy Hole , it's marked on one side "PATENTED SEPTEMBER 22 1914".

-gus

jermcramp1 · « **Reply #2 on:** June 14, 2012, 11:47:12 pm »

Wow! Talk about a find! We'll start the bidding at $1000

MWirwicki · « **Reply #3 on:** June 14, 2012, 11:59:16 pm »

Well now, there you have it! What a great site this is....

Pappy · « **Reply #4 on:** June 15, 2012, 07:30:33 am »

O man how I would love to have one of them to go with my old drill press,very cool find.

:)I love it. Now you can lube and fix it up and it will be ready for a new productive life.

Be around for your grand kids.

Pappy

cracker · « **Reply #5 on:** June 15, 2012, 09:24:49 am »

Hey Pappy you see them on ebay pretty often. Ron

jermcramp1 · « **Reply #6 on:** June 15, 2012, 10:58:44 am »

Make an offer?

Pappy · « **Reply #7 on:** June 15, 2012, 11:26:33 am »

Cracker I don't do ebay

guess I should start,

if you are serious about that
jermcramp1 ,pm me.

Pappy

jermcramp1 · « **Reply #8 on:** June 15, 2012, 12:14:50 pm »

Primitive Archer