Author Topic: native pottery  (Read 17194 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
native pottery
« on: June 11, 2012, 03:33:54 pm »
I am starting an experiment with clay from the bottom of flint creek here in Burlington Ia. I am tempering the clay with clam shells from the creek. I plan on pit firing the work. I separated the small rocks by liquefying the clay and pouring off the top leaving the stone and large sand particles. I am crushing the shell to a powder and adding it to the mix. If any of you habe done this i would like you input about your results.
(:::.) The ABO path is a new frontier to the past!

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: native pottery
« Reply #1 on: June 11, 2012, 03:53:24 pm »
I have done a lot of pot hunting in years past.

Here is a shell tempered Mississippian era ladle to give you an idea of how much crushed shell to put in your clay. Not the clearest picture but you can see the shell.


Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #2 on: June 11, 2012, 09:01:08 pm »
Can you post more pic of stuff you found. I am not sure what form i am going to make. Do you  have a site you like to look at on the web.
(:::.) The ABO path is a new frontier to the past!

Offline Parnell

  • Member
  • Posts: 5,556
Re: native pottery
« Reply #3 on: June 11, 2012, 11:03:51 pm »
Good thread!  I've been finding a lot of clay beds in the inter-coastal waterway, lately.  Probably decayed mangroves areas that come and go in the passes.  What would be a good plan for trying to make a pit-fired pot out of mangrove clay?  Do I smash shells and add it to it?  I'd be interested in trying my hand at it...
1’—>1’

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #4 on: June 12, 2012, 12:45:56 am »
Hey i cant tell the scale of the particles without a ruler. Couple of pictures.
(:::.) The ABO path is a new frontier to the past!

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: native pottery
« Reply #5 on: June 12, 2012, 10:32:28 am »
The shell particles are small, 1/16th" a smaller, the shell is Tennessee River mussel shell. The ladle was washed out of the banks of the Tennessee River between Stevenson and Bridgeport Al. I found it in the seventies before picking up such stuff was illegal. As you can see, it was made in the form of a breast which I found a bit unusual.

« Last Edit: June 12, 2012, 10:40:12 am by Eric Krewson »

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #6 on: June 19, 2012, 06:31:37 pm »
The clay was perfect today. So made a simple pot. Later this week I am going to fire this in a pit.
(:::.) The ABO path is a new frontier to the past!

Offline sadiejane

  • Member
  • Posts: 1,030
Re: native pottery
« Reply #7 on: June 19, 2012, 07:01:46 pm »
that pot looks great. really looking forward to the after firing pic too!
wild women don't get the blues

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #8 on: June 19, 2012, 07:14:12 pm »
I have read a lot about different  firing but would really like to hear about how others have fired their work.
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #9 on: June 19, 2012, 07:18:25 pm »
that pot looks great. really looking forward to the after firing pic too!
Thanks the marks on the pot have meanings . There are 12 full moons above fields of grass and a creek that runs below. I kept it simple for the first try.
(:::.) The ABO path is a new frontier to the past!

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: native pottery
« Reply #10 on: June 19, 2012, 10:05:18 pm »
That's wonderful stuff, John, I love it. 

How about a simple primer on pit firing for those of us thinking of making the jump?
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #11 on: June 19, 2012, 11:26:28 pm »
Sure jw, I will do a play by play.
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: native pottery
« Reply #12 on: June 19, 2012, 11:34:55 pm »
I put two shell halves or 1 medium clam/mussle in to the clay of the pot seen above. I  plan to let the pot dry real good before putting it to the fire. Also I plan to heat treat flint below the pot so that two  processes can be preformed at one time.
(:::.) The ABO path is a new frontier to the past!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: native pottery
« Reply #13 on: June 20, 2012, 10:42:54 am »
That is sweet John,very nice work,you are sure staying busy while you are off. :) :) :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: native pottery
« Reply #14 on: June 21, 2012, 11:52:16 am »
John, that is really some cool stuff.  Can't wait to see your results.
Matt Wirwicki
Owosso, MI