Author Topic: my second whack at punch notching, no guts no glory  (Read 3413 times)

0 Members and 2 Guests are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
my second whack at punch notching, no guts no glory
« on: May 22, 2012, 07:17:26 pm »
here it is and i have one ?, should i keep going or start another and keep this one intact, Bub

« Last Edit: May 23, 2012, 03:46:41 pm by bubby »
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: my second whack at punch notching
« Reply #1 on: May 22, 2012, 07:30:02 pm »
If it was me, I would leave it as is. But as they say, 'no guts no glory.'
seriously, I would look at the platform(s) and let that tell me to stop or go.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline bubby

  • Member
  • Posts: 11,054
Re: my second whack at punch notching
« Reply #2 on: May 22, 2012, 07:37:22 pm »
bevan i went a little farther after i posted the pics, one stalled a bit, so i'm on the fence about it, but i got another about ready to blow, i mean go, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: my second whack at punch notching
« Reply #3 on: May 22, 2012, 07:41:25 pm »
I figure you got a nice point there. If it has stalled at all, I would leave it. No reason to bust that beauty when there is plenty of other stuff waiting.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline bubby

  • Member
  • Posts: 11,054
Re: my second whack at punch notching
« Reply #4 on: May 22, 2012, 07:43:10 pm »
yeah it ain't no Will H point but i'm kinda proud of it, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: my second whack at punch notching
« Reply #5 on: May 22, 2012, 07:45:37 pm »
No it is not a Will H point. But it is a BEAUTY Bubby point. GREAT work Sir!!
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Mesquite

  • Member
  • Posts: 56
Re: my second whack at punch notching
« Reply #6 on: May 22, 2012, 08:17:21 pm »
It's a pretty color and I love those clam shell flakes. I'd probably leave it and start on the next.  :)

Offline bubby

  • Member
  • Posts: 11,054
Re: my second whack at punch notching
« Reply #7 on: May 22, 2012, 08:41:28 pm »
i tryed to get a side veiw but look's like it's turned a bit, Bub

failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Will H

  • Member
  • Posts: 2,120
Re: my second whack at punch notching
« Reply #8 on: May 22, 2012, 09:01:57 pm »
Bub that looks real good to me :) they kinda stall on me alot...if you have a diamond file just file till you get the platform below center toward the side with the most mass. If it dosent take with the first strike make sure your punch is below center within the platform. The
Only way they ever break on me is when I fail to do this... The ears aren't really very fragil until they get around an inch or so. That when you really got to be careful. Also be sure to keep the corners of the notch as square as possible, it helps the flake detach a little easier ;) good luck! No guts no glory! It's just a rock ;) :)
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: my second whack at punch notching
« Reply #9 on: May 22, 2012, 10:38:42 pm »
Bubby, Looks like ya got it now 8) If they stall will's got ya covered. Looks good  ;D If ya like it quit but if your feeling brave just hit it :o  Later Bob

Offline bubby

  • Member
  • Posts: 11,054
Re: my second whack at punch notching
« Reply #10 on: May 23, 2012, 06:35:19 am »
thank's will and bob, i think i'll keep this one as is, gonna get a bunch ready to notch and kinda keep a physical record of how i'm progressing, might make a cool display, i was practicing tonight at work and got a lot deeper notch, then i got greedy >:D, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: my second whack at punch notching
« Reply #11 on: May 23, 2012, 07:44:22 am »
well done bubb. excellent. i do agree with what was said, no guts no glory. thats how we learn
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Will H

  • Member
  • Posts: 2,120
Re: my second whack at punch notching
« Reply #12 on: May 23, 2012, 09:50:06 am »
If you have some flakes laying around about the thickness of a point try learning on them. You'll have it down in no time ;) 
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Jimbob

  • Member
  • Posts: 871
Re: my second whack at punch notching
« Reply #13 on: May 23, 2012, 10:57:23 am »
I like it!! Those notches look great from here.
You skin that smoke wagon and we'll see what happens!---Are you gonna do something? Or just stand there and bleed?

"Show me a man who will jump out of an airplane, and I'll show you a man who'll fight for his country."
Lt. General James Gavin

http://www.facebook.com/#!/jimmy.filidei

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: my second whack at punch notching
« Reply #14 on: May 23, 2012, 12:22:30 pm »
Your makin me nervous bub ::). What do ya mean you got greedy, hmm? I'm with most everybody else - no guts no glorry and i have plenty of half points to prove it >:D ;D..
When you come upon a track or trail you do not know, follow it to the point of knowing.