« previous next »
Pages: [1]

Author Topic: Static recurve glued up stave to trade for?  (Read 2434 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Static recurve glued up stave to trade for?
« on: May 16, 2012, 04:21:50 pm »
Lost my impetus here.  Any interest?  I have boo, maple, and Ipe belly  Static recurved tips with two wedges to get deep bends.

I'll try to get a pic up.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Static recurve glued up stave to trade for?
« Reply #1 on: May 16, 2012, 11:20:58 pm »
I'd like to see a picture.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline HickoryBill

  • Member
  • Posts: 785
Re: Static recurve glued up stave to trade for?
« Reply #2 on: May 16, 2012, 11:42:46 pm »
Any pics?
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Static recurve glued up stave to trade for?
« Reply #3 on: May 17, 2012, 02:34:07 pm »
Oh yea...

It's been bussy  :D
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Static recurve glued up stave to trade for?
« Reply #4 on: May 17, 2012, 03:00:51 pm »
Would love to see a picture too.  ;D
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Static recurve glued up stave to trade for?
« Reply #5 on: May 17, 2012, 04:17:43 pm »
Actualy I have two.  One has "flats" in the R/D design.  I was aiming for a R/D bend inteh handle recurve...  The wood softened and sucked down to the form in places I didn't want.  I'm sure it will still shoot.

then the above one.  I was just looking at it and realized that I may have left my maple core too thick.  It will be high draw weight I think.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Static recurve glued up stave to trade for?
« Reply #6 on: May 17, 2012, 06:22:35 pm »
Quote from: Prarie Bowyer on May 17, 2012, 04:17:43 pm
Actualy I have two.  One has "flats" in the R/D design.  I was aiming for a R/D bend inteh handle recurve...  The wood softened and sucked down to the form in places I didn't want.  I'm sure it will still shoot.

Flat spots in the glued up form you mean? When we make stave bows alot of the times a funky flat spot - twisted form etc stave will end up coming around to a beautiful tiller, so I would not worry about no flat spots myself. Just deal with em on the tiller I guess?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: [1]
« previous next »