« previous next »
Pages: [1]

Author Topic: Steam bending? ( now!)  (Read 1435 times)

0 Members and 1 Guest are viewing this topic.

Offline Newindian

  • Member
  • Posts: 734
Steam bending? ( now!)
« on: April 29, 2012, 11:15:07 pm »
Got a liitle green juniper bow sitting over the pot right now ( 30# is my gess)  have nothing els to do so i decided i would learn to steam recurves. Probably 1 inch square cross section where I'm bending it I sould let it sit for about 25-35 minuets right.
Logged
I like free stuff.

Offline Newindian

  • Member
  • Posts: 734
Re: Steam bending? ( now!)
« Reply #1 on: April 29, 2012, 11:37:21 pm »
Never mind 30 min worked great ;)
Logged
I like free stuff.

Offline Youngboyer2(billyf)

  • Member
  • Posts: 487
  • Live by the man-née and the sa-wa.
Re: Steam bending? ( now!)
« Reply #2 on: April 30, 2012, 01:14:40 am »
For dry heat I was taught to let it sit until it it's cool and then leave it for a few hours, just to make sure it doesn't pop back into place
Haven't even tried steaming though, what you did could have very well been perfect for steaming, I wouldn't know
Logged
"You speak Treason!" "Fluently"-Robin of Locksley
When people ask "why didn't you do that the first time" you can be sure that they  have never made a bow before.

gutpile

  • Guest
Re: Steam bending? ( now!)
« Reply #3 on: April 30, 2012, 04:13:34 pm »
never dry heat green wood..only dry wood...always steam or boil green wood...dry heat on green wood will certainly check...gut
Logged
Pages: [1]
« previous next »