Author Topic: Hafting Question  (Read 1166 times)

0 Members and 1 Guest are viewing this topic.

Offline Bevan R.

  • Member
  • Posts: 1,691
Hafting Question
« on: April 25, 2012, 01:01:59 pm »
Has anyone used thin rawhide strips as a hafting instead of sinew? This is for knives not arrows. I have some thin goat rawhide and was wondering about using a 1/8" or so strip.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline half eye

  • Member
  • Posts: 3,300
Re: Hafting Question
« Reply #1 on: April 25, 2012, 02:49:16 pm »
There are lots of artifacts in the national museums where the NA's did exactly that, even including arrows (especially the fore-shafted types) and utilizing the stone heads. I have seen a lot of artifact photos of various tools such as axes, knives, hoe's, adz's etc where the raw-hide was the only haftment. Also have seen them (artifacts) where it was all pitch, raw-hide and pitch, and just plain raw-hide.

Hope that helps ya some.
rich

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Hafting Question
« Reply #2 on: April 25, 2012, 02:56:50 pm »
Thanks Rich! That helps allot. I am going to haft some knife blades into wood and/or antler and I have plenty of goat rawhide. I am going to give it a shot this weekend.
Bowmakers are a little bent, but knappers are just plain flaky.