« previous next »
Pages: [1]

Author Topic: Oak Board Pyramid Bow: Tillering Help  (Read 4062 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeremiah

  • Member
  • Posts: 34
Oak Board Pyramid Bow: Tillering Help
« on: April 18, 2012, 09:27:46 am »
Everyone's comments on the bow I'm working on was really helpful. My friend is building this one and asked that I put some pictures up so yall could comment on the tiller. Any suggestions would be great!

These are taken with a tillering string, we were wondering if it was time to switch to the actual bow string?






Logged

blackhawk

  • Guest
Re: Oak Board Pyramid Bow: Tillering Help
« Reply #1 on: April 18, 2012, 09:33:51 am »
Brace that puppy
Logged

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Oak Board Pyramid Bow: Tillering Help
« Reply #2 on: April 18, 2012, 10:25:39 am »
Looks real good. At 27" inches you should be at your desired weight. Brace her, give her several gentle pulls, and try an arrow.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Oak Board Pyramid Bow: Tillering Help
« Reply #3 on: April 18, 2012, 10:53:53 am »
Don't pull any farther on th long string. Get her braced(full brace now) and see how she looks.
  Once you get  6" to 8" on the long string brace your bow with a short string to about 4" to see how everything lines up.
  It does look like your left limb is stiff in the outter 1/3.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Oak Board Pyramid Bow: Tillering Help
« Reply #4 on: April 18, 2012, 12:26:19 pm »
Ya I would brace it now, what Pat said but looking really good so far. :) May look a little different once it is braced. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »