Author Topic: Un-sinew backing a bow  (Read 5744 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Un-sinew backing a bow
« Reply #15 on: April 17, 2012, 02:46:19 am »
Thats a striker for a slate turkey call, soy. I've never turkey hunted but have thought about it.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Un-sinew backing a bow
« Reply #16 on: April 17, 2012, 04:06:05 am »
I was referring to the mouth call....dont try turkey hunting unless you need another addiction  >:D its a bad one...glad I can quit any tom i want to :o i mean time :-\
Is this bow making a sickness? or the cure...

mikekeswick

  • Guest
Re: Un-sinew backing a bow
« Reply #17 on: April 17, 2012, 04:15:51 am »
The tub of  warm water is the best option. Sinew needs  damp heat to separate it safely.
 Not sure you're going to  be doing much of a rescue by just turning a heatgun on it.
 The whole point of hideglue is its  reversability. That's why it's still being used today for other purposes that require a reversible glue.
I only said it because i've done it and it works. You have to be careful but it does work. I understand about hide glues properties and have used it a lot in various applications. Sometimes soaking in water isn't an option. I agree that the safest method by far is that shown above and i'm sure it will help people.