Author Topic: Can I fix this (Read 7919 times)

Pappy · « **on:** August 27, 2007, 07:42:42 am »

The bow with all the whoops in it seem to have developed a little hinge and a small crack,wonder
if it can be repaired.The thrill of victory and the agony of defeat.For those that think after a lot of bows that you get to where you don't have trouble,think again.Dose this annoy me [YES] dose
it make me want to quit[ NO].

Pappy

[attachment deleted by admin]

GraemeK · « **Reply #1 on:** August 27, 2007, 08:18:10 am »

Hi Pappy
Interesting observation --- At the end of the day if it was easy and always worked it would no longer be a challenge or much fun.

Still I see no problem with that bow -- should be able barbeque some brats with it so not all is lost.

Also makes it easy to know when to start the next one.

Regards Graeme

GregB · « **Reply #2 on:** August 27, 2007, 08:21:26 am »

I think it can still be salvaged into a good performing bow! Just cut that bad limb off and splice a new one in its place in the handle. Thin the new limb to match, and there you have it!

DBernier · « **Reply #3 on:** August 27, 2007, 08:26:58 am »

Hey Pappy---What Greg said.

Dick

Marc St Louis · « **Reply #4 on:** August 27, 2007, 08:27:17 am »

From the angle of the splinters it would seem there was some angled growth there

Pappy · « **Reply #5 on:** August 27, 2007, 09:20:32 am »

Marc I think you are right,after looking closer you could see it,it was a bad swirl there,I should have seen it in the beginning but missed it.Most of the time I will pick up on the run off but it is
pretty obvious I didn't on this one.All is good ,it ant like it is the first I ever broke and I am sure it
won't be the last.If we can all learn something from it,It will be worth it. :)Greg,Dick yall are right now all I need to do is break another one.

Pappy

rkeltner · « **Reply #6 on:** August 27, 2007, 10:13:26 am »

according to the bow makers bible, this a good opportunity, and excuse, for making a take down bow!

chessieboy · « **Reply #7 on:** August 27, 2007, 10:13:55 am »

bust out the duct tape

and CA

DanaM · « **Reply #8 on:** August 27, 2007, 10:27:46 am »

Could always make a cane out of the solid side, but I like he take down idear better.

Justin Snyder · « **Reply #9 on:** August 27, 2007, 10:42:28 am »

If anybody can fix it you can. Try one of those Marc StLouis style takedowns. Justin

cowboy · « **Reply #10 on:** August 27, 2007, 11:42:37 am »

Well at least it happened on the tree and not in your hand

, that kinda smarts.

medicinewheel · « **Reply #11 on:** August 27, 2007, 12:08:44 pm »

2 up 1 down...

....literally...
frank

Hillbilly · « **Reply #12 on:** August 27, 2007, 01:04:51 pm »

A little bubble gum, some duct tape, and a couple 3" drywall screws and it'll be good as new.......

I've made a few of those myself over the years. At that point I just start calling them an "atlatl stave" instead of a "bow stave".

mullet · « **Reply #13 on:** August 27, 2007, 07:05:33 pm »

Hah,Hah.I thought I was the only one making Atlatls out of the left over limb.

mamba · « **Reply #14 on:** August 27, 2007, 07:24:50 pm »

I'd get that right limb bending a little more in the outer thirds.

Primitive Archer