« previous next »
Pages: [1]

Author Topic: Is there a thing as too thin for sinew?  (Read 2058 times)

0 Members and 1 Guest are viewing this topic.

Offline jermcramp1

  • Member
  • Posts: 147
Is there a thing as too thin for sinew?
« on: April 10, 2012, 10:03:51 pm »
I am making a snakey hick bendy handle, 56 ttt, 1" wide all the way through until the last 8" where it tapers to 1/2". I am looking for 50+ at 28", sinew should be fine right? or silk?
Logged
Even the dogs get the crumbs...

Offline rileyconcrete

  • Member
  • Posts: 606
Re: Is there a thing as too thin for sinew?
« Reply #1 on: April 10, 2012, 10:21:11 pm »
I would use sinew.  Just my personal preference though.  Love the way sinew works.

Tell
Logged
Tell Riley

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Is there a thing as too thin for sinew?
« Reply #2 on: April 10, 2012, 11:50:05 pm »
I Vote for Sinew!!!

:)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Boofus

  • Member
  • Posts: 55
Re: Is there a thing as too thin for sinew?
« Reply #3 on: April 11, 2012, 12:48:50 am »
Sinew, with mildly "flipped" tips to reduce the stack some.
Logged

Offline jermcramp1

  • Member
  • Posts: 147
Re: Is there a thing as too thin for sinew?
« Reply #4 on: April 11, 2012, 11:27:41 am »
Gotta get to shreddin then...
Logged
Even the dogs get the crumbs...

Offline jermcramp1

  • Member
  • Posts: 147
Re: Is there a thing as too thin for sinew?
« Reply #5 on: April 11, 2012, 12:23:27 pm »
Hey boofus, I thought hickory didn't hold flipped tips or induced reflex well?
Logged
Even the dogs get the crumbs...

mikekeswick

  • Guest
Re: Is there a thing as too thin for sinew?
« Reply #6 on: April 11, 2012, 12:53:48 pm »
If you leave the tips a fraction thicker than the working limbs they won't pull out. Or leave them a bit thicker still and then you will have room to narrow them more - this will help with performance.
Logged

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: Is there a thing as too thin for sinew?
« Reply #7 on: April 11, 2012, 01:29:00 pm »
if you sinew it after you flip the tips you shouldn't lose much if any reflex/recurve
Logged
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: Is there a thing as too thin for sinew?
« Reply #8 on: April 11, 2012, 02:26:02 pm »
If you use steam to reflex the tips it should hold better than using dry heat. I would seal the area to be steamed with shellac to pervent the stave from taking on any moisture. The shellac can take the heat and moisture from the steam. The shellac is easily removed with alcohol.
  I have a 57" sinew backed osage with flipped tips. It pulls 55#@26" and could have been heavier.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Is there a thing as too thin for sinew?
« Reply #9 on: April 11, 2012, 04:51:15 pm »
Pardon Y'all,

I have a question along these lines as it pertains to Steaming.
Is shellac preferable to tung oil for sealing the stave prior to steaming?
Will tung oil work?

I've seen both referenced for use in this manor and find it confusing.

Thank You,

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: Is there a thing as too thin for sinew?
« Reply #10 on: April 11, 2012, 06:06:39 pm »
Gus, shellac is not affected by heat or moisture. I don't know about tung oil but I would kind of doubt it though.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Is there a thing as too thin for sinew?
« Reply #11 on: April 11, 2012, 06:51:16 pm »
Good Deal.

Thank You Sir!

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX
Pages: [1]
« previous next »