« previous next »
Pages: 1 2 [3] 4

Author Topic: Building my first osage bow - first build along post  (Read 14187 times)

0 Members and 1 Guest are viewing this topic.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #30 on: April 13, 2012, 09:38:15 am »
Thanks for the tip Pappy.  I will have to give dry heat a try on the next one that needs tweeking.   I should have more progress to post next week.   
Logged
Howard
Gautier, Mississippi

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Building my first osage bow - first build along post
« Reply #31 on: April 13, 2012, 12:09:53 pm »
I have made some very fine bows from Livingston 'sage... My boss has a cabin and some land off McCainsville Rd. in Livingston that I hunt every year, 2 years ago he let me cut some osage from there.  Good stuff.  Can't wait to see how your bow turns out.  Looking great so far!  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #32 on: April 16, 2012, 02:52:53 am »
  Thanks Josh.  You will have to let me know next time you are in town!  Yeah, we are blessed with good bow wood all around Sumter County.  I know McCainville Road.  There are some really pretty camps in that part of the county and it is infested with ERC and osage.   

  Had a slight set back on my bow over the weekend....  Nothing catastrophic, just a rookie's mistake.  I started tillering and realized that one limb really needed to bend closer to the handle.  It is going to be a bendy handled bow, and I guess I was overly enthusiastic, in that I  had already glued some leather to build up the grip area....  That had to come off.  So, a little steam on the handle to loosen up the glue and it came right off.  I will be back to tillering tomorrow.  Living and learning!  I should have gotten it tillered out before thinking about handles....  Oh well....  other than that little screw up, it is coming along nicely.  More to come....
Logged
Howard
Gautier, Mississippi

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #33 on: April 17, 2012, 03:44:54 am »
Tillered out to 50lbs at 28".  Alternated between the rasp and the scraper and checked for flat spots and hinges with my handy dandy 4" long scrap of 1 X 2.  Still have to do a little tweeking here and there and this bow actually will finish out at about 46#.  Shot my first arrow out of it this evening and I am liking it.  Just unstrung the bow, shows zero string follow....  checked it three hours later and it is back to about an inch of reflex.  Now, I will think about glueing the leather up for the handle and arrow rest.  Hopefully I will have a better full draw pic - my photographer was in a hurry....
Logged
Howard
Gautier, Mississippi

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Building my first osage bow - first build along post
« Reply #34 on: April 17, 2012, 04:16:04 am »
Looking really nice  ;)
Logged
Is this bow making a sickness? or the cure...

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #35 on: April 17, 2012, 04:27:22 am »
Thanks soy.  I see why so many folks prefer osage orange.  It is amazing stuff.  I read in a post on this site somewhere that "it doesn't take much osage to make a bow".  I see what they were talking about.  This was not a very big limb to start with... only about 3" diameter.  Osage rocks.
Logged
Howard
Gautier, Mississippi

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Building my first osage bow - first build along post
« Reply #36 on: April 17, 2012, 04:30:44 am »
Yes it dose  ;) welcome to the yella fever >:D
Logged
Is this bow making a sickness? or the cure...

Offline TRACY

  • Member
  • Posts: 4,523
Re: Building my first osage bow - first build along post
« Reply #37 on: April 17, 2012, 08:42:12 am »
You should be very proud of that fine bow. Excellent job !

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #38 on: April 17, 2012, 09:14:59 am »
Thanks so much Tracy.  I am and I have really enjoyed building this one, so far.  I am gonna do a little finishing work on it and see if I can't get some better photos of it posted in the near future.  Thanks to everyone for looking and helping out.   
Logged
Howard
Gautier, Mississippi

blackhawk

  • Guest
Re: Building my first osage bow - first build along post
« Reply #39 on: April 17, 2012, 09:32:35 am »
Looking pretty good...my only constructive criticism would b to reduce some thickness off of the depth of your stiff tips. How narrow are your tips width wise?
Logged

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #40 on: April 17, 2012, 09:47:10 am »
Thanks Blackhawk.  Yeah, I think they are still sort of meaty.  They are about 3/8" thick.  I will post a close up of the tips later.  There are some drying cracks that run longways on one of the tips and I am a little scared to mess with them....  They haven't been a problem so far, but they did sort of give me the creeps.  This bow was the one your Mighty Mouse inspired me to try. 
Logged
Howard
Gautier, Mississippi

blackhawk

  • Guest
Re: Building my first osage bow - first build along post
« Reply #41 on: April 17, 2012, 10:13:32 am »
You mean 3/8 wide right? If so and with the cracks id take some off the thickness. I usually make the thickness of my levers around .080" thicker than the thinnest part of the working limb(and i have gone less in case you got big #$%!)which is always right before the levers. And then i taper thickness my levers down slightly to the tips.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Building my first osage bow - first build along post
« Reply #42 on: April 17, 2012, 10:21:46 am »
Looking really good,looks like you have about got it.Nice work. :) :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Building my first osage bow - first build along post
« Reply #43 on: April 17, 2012, 11:47:23 pm »
Oh, how I wanna shoot that bow!  Then I wanna copy that bow.  well done!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Building my first osage bow - first build along post
« Reply #44 on: April 18, 2012, 02:58:03 am »
Yeah, they are 3/8ths wide.  I took a couple of pics of belly and back of the tip that I was talking about.  I do agree with you that they are a little thick.  I have some finishing up to do on it over the next few days.  It shoots pretty sweet and seems to be pretty fast.  Taking a little weight off the tips can't help but make it a little better though. I think they are definitely a little too thick nearer the fades.  The cracks are super glued and have been no trouble.  Thanks for the tip Blackhawk. 

Thanks Pappy and JW.  I shot about fifty arrows through it this afternoon and checked the reflex on it about two hours after unstringing and I am liking this little bow!
Logged
Howard
Gautier, Mississippi
Pages: 1 2 [3] 4
« previous next »