« previous next »
Pages: [1]

Author Topic: High Crown Hickory backing  (Read 1030 times)

0 Members and 1 Guest are viewing this topic.

Offline bigcountry

  • Member
  • Posts: 841
High Crown Hickory backing
« on: March 25, 2012, 06:41:56 pm »
I backed some osage slats with some hickory.  I was thinking instead of keeping full depth, to just make it high crowned in the middle of the hickory.  Good or bad idea?

The backing has some slight runoff on one end.  And figured the high crown would keep it from lifting a splinter.

Logged
Westminster, MD

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: High Crown Hickory backing
« Reply #1 on: March 25, 2012, 07:08:05 pm »
I dont see why it would hurt a thing. Hickory is meaner than a sacked cat in tension.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: High Crown Hickory backing
« Reply #2 on: March 25, 2012, 07:14:07 pm »
why not just trap the back? it would probably be easier and its just doing the same thing as your suggesting ;)
Logged

Offline bigcountry

  • Member
  • Posts: 841
Re: High Crown Hickory backing
« Reply #3 on: March 27, 2012, 01:53:31 pm »
I think I will trap it some.  That way it might keep the tension in the middle (maybe a bad thing).

Logged
Westminster, MD
Pages: [1]
« previous next »