« previous next »
Pages: [1]

Author Topic: Heat treating a bow with sinew?  (Read 2448 times)

0 Members and 1 Guest are viewing this topic.

Offline Newindian

  • Member
  • Posts: 734
Heat treating a bow with sinew?
« on: June 12, 2012, 12:53:16 am »
Ive heard that I order to re-heat treat, or steam,a sinew backed bow you have to strip off the sinew in the section you want to bend.
Logged
I like free stuff.

Offline RobWiden

  • Member
  • Posts: 99
Re: Heat treating a bow with sinew?
« Reply #1 on: June 12, 2012, 01:19:44 am »
    I saw somewhere that someone heated a sinewed bow for some reason, don't know if it was bending or heat treating, and they were very careful not to overdo it. Apparently it worked. Personally, I'm too chicken to try it.
Logged
If I knew what I was doing, I'd probably be bored with it, and I wouldn't be here.

mikekeswick

  • Guest
Re: Heat treating a bow with sinew?
« Reply #2 on: June 12, 2012, 04:28:11 am »
It depends what you mean by heat treating...but standard heat treating cannot be done with a sinew backing. If you are trying to correct allignment on a recurve then it's possible.
Logged
Pages: [1]
« previous next »