« previous next »
Pages: [1]

Author Topic: cedar tip overlays  (Read 2967 times)

0 Members and 2 Guests are viewing this topic.

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
cedar tip overlays
« on: March 20, 2012, 10:30:32 am »
just curious if anyone has tried cedar for tip overlays.....seems it would be too soft...but i have beeen surprised before with erc  so im thinking the fibers may compress and actually be pretty tough...   its such an un-usual wood i dont know what is to be expected of it anymore
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: cedar tip overlays
« Reply #1 on: March 20, 2012, 10:32:45 am »
Good question. I have a ton of white cedar trim around and thought some of the sections would make a cool overlay.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: cedar tip overlays
« Reply #2 on: March 20, 2012, 10:38:00 am »
Ive thought of using my scraps for overlays too,but always shy away from doing it. Maybe use it as a bottom piece with a hard wood on top where the string actually grooves in? That way its protected from the highest point of pressure,and the string wouldnt actually be touching it much where it matters most
Logged

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: cedar tip overlays
« Reply #3 on: March 20, 2012, 10:57:34 am »
Since I've seen horn and snakewood overlay "snap in half" at the string groove, I use nothing but the densest woods. I like skinny tips, narrower than ½", so there's not much wood to hold my string in place. I need it to hold, and not worry about the string denting the overlay. WRC is way too soft for me liking. I would have to compensate the weak wood by making my limbtips much wider - not desirable for me.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline straightarrow

  • Member
  • Posts: 501
  • "Success or failure, neither are final"
Re: cedar tip overlays
« Reply #4 on: March 20, 2012, 12:05:16 pm »
 I just put cedar on a bow that I'm working on. They shaped really nice with ease.

Jon
Logged

Offline Ryan_Gill_HuntPrimitive

  • Member
  • Posts: 1,676
Re: cedar tip overlays
« Reply #5 on: March 20, 2012, 02:37:54 pm »
let us know how it holds up!  and the poundage of the bow as well
Logged
Formerly "twistedlimbs"
Gill's Primitive Archery and HuntPrimitive

Offline jimmy

  • Member
  • Posts: 185
Re: cedar tip overlays
« Reply #6 on: March 20, 2012, 02:53:49 pm »
I cut some real nice red cedar just for tip overlays once. It was real pretty but it splits very easily. It made me nervous having all that pressure from the string bearing down into it, so I never used it again.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: cedar tip overlays
« Reply #7 on: March 20, 2012, 03:25:43 pm »
i would not use cedar as the top overlay, but i've got some manzanita that i'm gonna use, beautyfull, and hard, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline straightarrow

  • Member
  • Posts: 501
  • "Success or failure, neither are final"
Re: cedar tip overlays
« Reply #8 on: March 20, 2012, 04:44:10 pm »
The bow I put them on is 53@27. I was nervous at first about them being too soft I got my grooves cut deep and the finish is hard......I think they'll be fine. I'll post a picture later

Jon
Logged

Offline straightarrow

  • Member
  • Posts: 501
  • "Success or failure, neither are final"
Re: cedar tip overlays
« Reply #9 on: March 21, 2012, 04:04:02 pm »
The very ends are ebony over cedar
Logged

blackhawk

  • Guest
Re: cedar tip overlays
« Reply #10 on: March 21, 2012, 04:09:30 pm »
Hey jon...why dont ya show us the rest of that bow >:D.....shes a beauty
Logged

Offline straightarrow

  • Member
  • Posts: 501
  • "Success or failure, neither are final"
Re: cedar tip overlays
« Reply #11 on: March 21, 2012, 04:12:53 pm »
Lol...... I'm giving it to him tonight. Hope to have it posted soon
Logged
Pages: [1]
« previous next »