« previous next »
Pages: [1]

Author Topic: bone points????  (Read 1987 times)

0 Members and 1 Guest are viewing this topic.

Offline jturkey

  • Member
  • Posts: 264
  • I wouldn't make it a habit calling me that!
bone points????
« on: March 20, 2012, 04:14:25 pm »
making some simple triangular bone points 2 questions first how think do they really need to be to be effective against whitetails and or hogs
2ndly how heavy  or light can they be as well have one cut out it is 1 3/8" in cutting edge and almost a 1/4" thick feels heavier than my 140 gr magnuses but no scale to measure them on.
Logged
doc

Offline bubby

  • Member
  • Posts: 11,054
Re: bone points????
« Reply #1 on: March 20, 2012, 05:38:10 pm »
maybe sadiejane will chime in, she makes bone points like you want, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: bone points????
« Reply #2 on: March 20, 2012, 07:58:13 pm »
If I were making bone points, I'd make sure they were of legal hunting size and try to get them as close to my regular point weight as possible. IMO. You could make a simple balance beam w/ one of your mangus heads to get your bone points close. , dpgratz
Logged
(:::.)    Osage music played daily. :)

Offline jturkey

  • Member
  • Posts: 264
  • I wouldn't make it a habit calling me that!
Re: bone points????
« Reply #3 on: March 21, 2012, 12:42:01 am »
yeah bow that is what i am going to do tomorrow just wanted to make sure i am within the advantages of the bone point and not to think or anything. we have no point restriction here in mississippi according to the new hand book they just put out but i am going for a little wider cut but have no clue on the thickness right now they are pretty thick right now about 1/4" or thicker is why i am asking.
Logged
doc

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: bone points????
« Reply #4 on: March 21, 2012, 12:59:04 am »
I would love to see someone do a bone point build along...
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline sadiejane

  • Member
  • Posts: 1,030
Re: bone points????
« Reply #5 on: March 21, 2012, 09:20:15 am »
Logged
wild women don't get the blues

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: bone points????
« Reply #6 on: March 21, 2012, 12:04:55 pm »
  Give moose antler at try a drimal works prefect. Moose artlers solid not properous in the middle like deer antler. I make them 2 3/4's LONG TO A STRONG 1/8 to 3/16's THICK close to a ZIWICKY.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline jturkey

  • Member
  • Posts: 264
  • I wouldn't make it a habit calling me that!
Re: bone points????
« Reply #7 on: March 21, 2012, 12:23:08 pm »
wish we had moose here in mississippi but i guess us rednecks would killem off to quick anyways. lol well i will get back with you on how this works
Logged
doc

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: bone points????
« Reply #8 on: March 21, 2012, 12:51:24 pm »
I would think twice about using a bone point on a hog. They are tough enough for steel or stone points.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: bone points????
« Reply #9 on: March 21, 2012, 04:27:48 pm »
I made a "bone point" video.   ;D

http://www.youtube.com/watch?v=3iL0eFOONmo
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
Pages: [1]
« previous next »