« previous next »
Pages: [1]

Author Topic: Glue to coat the back of a bow with???  (Read 2655 times)

0 Members and 1 Guest are viewing this topic.

Offline MoNative

  • Member
  • Posts: 131
Glue to coat the back of a bow with???
« on: March 13, 2012, 06:14:50 pm »
What is a wood glue that is flexible, in other words suitable for applying to the back of a bow?
Logged
Jesus is the way, the truth, and the light. He is our rock of ages, our everlasting arms.

Offline carpentertimw

  • Member
  • Posts: 42
Re: Glue to coat the back of a bow with???
« Reply #1 on: March 13, 2012, 06:36:44 pm »
To coat it as a backing, or to glue a backing on? Also how strong is the bow?
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Glue to coat the back of a bow with???
« Reply #2 on: March 13, 2012, 09:48:19 pm »
All wood glues are appropriate, but most guys use TiteBond.
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline MoNative

  • Member
  • Posts: 131
Re: Glue to coat the back of a bow with???
« Reply #3 on: March 13, 2012, 11:45:55 pm »
It's just for coating the back. And it is right around 55#-60#. And I have this one spot on that Cal bow that worries me in particular, I just want to uses the glue reassure it will hold. 
Logged
Jesus is the way, the truth, and the light. He is our rock of ages, our everlasting arms.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Glue to coat the back of a bow with???
« Reply #4 on: March 14, 2012, 12:01:13 am »
I don't know if glue alone will help much.  If it were mine, I'd put down some hide glue followed by some sinew  ;)
Logged
I started out with nothin' and I still got most of it left

Offline JW_Halverson

  • Member
  • Posts: 11,928
Re: Glue to coat the back of a bow with???
« Reply #5 on: March 14, 2012, 12:06:32 am »
I'd use a consistent coat of hide glue.  And then I would put a consistent coat of "pre-hide glue"* over that.




*"Pre-hide glue" is hide, as in rawhide!   >:D
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Glue to coat the back of a bow with???
« Reply #6 on: March 14, 2012, 01:45:16 am »
Glue alone is not going to offer any protection for the back of a bow.
Logged
Gordon

Offline RobWiden

  • Member
  • Posts: 99
Re: Glue to coat the back of a bow with???
« Reply #7 on: March 14, 2012, 03:01:50 am »
    I've tried using hide glue by itself, thinking it would soak into the wood and hold an iffy back. It didn't. No point wasting wood and time that way, better to use rawhide, silk, linen or whatever.    Rob
Logged
If I knew what I was doing, I'd probably be bored with it, and I wouldn't be here.

Offline Jude

  • Member
  • Posts: 286
  • Julian Benoit, Black River, NY & Kandahar, Afghan.
Re: Glue to coat the back of a bow with???
« Reply #8 on: March 14, 2012, 03:53:40 am »
Glue by itself won't accomplish anything.  Even epoxy requires a fiber matrix to achieve tensional strength.  The only reason to spread glue on the back and let it dry, is to size the surface in preparation for backing with some other material.  This keeps the wood from soaking up all the glue and starving the glue joint.

Jude
Logged
"Not all those that wander are lost."--Tolkien
"If at first you don't succeed, get a bigger hammer."--Benoit

Offline MoNative

  • Member
  • Posts: 131
Re: Glue to coat the back of a bow with???
« Reply #9 on: March 14, 2012, 12:13:15 pm »
I am not trying to back the bow, it's just that spot on the back and I want something to seel it up.
Logged
Jesus is the way, the truth, and the light. He is our rock of ages, our everlasting arms.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Glue to coat the back of a bow with???
« Reply #10 on: March 14, 2012, 12:28:20 pm »
Thats what urethane should do if you already sealed your bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: Glue to coat the back of a bow with???
« Reply #11 on: March 14, 2012, 03:09:46 pm »
Quote from: MoNative on March 14, 2012, 12:13:15 pm
I am not trying to back the bow, it's just that spot on the back and I want something to seel it up.

If you feel a certain area is in question on your bows back,then you need to wrap it with sinew,artificial sinew,rawhide etc..at the very least. But backing it with rawhide,silk,sinew,linen etc..would be much better. BUT GLUE ALONE WONT HOLD IT TOGETHER NO MATTER WHAT TYPE YOU USE. ;)...i had to type in bold in case you missed reading it by several other seasoned veteran bowyers.  ;)
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: Glue to coat the back of a bow with???
« Reply #12 on: March 14, 2012, 04:29:02 pm »
Quote
I am not trying to back the bow, it's just that spot on the back and I want something to seel it up.

If all you want to do is seal the area from moisture, any good finish will do. If, however, you want to prevent a splinter from forming, you will need to either wrap the area or back the bow as several others on this thread have already stated.
Logged
Gordon

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Glue to coat the back of a bow with???
« Reply #13 on: March 14, 2012, 06:46:45 pm »
It would not do much unless combined with a backing. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »