Author Topic: Incense cedar  (Read 4750 times)

0 Members and 1 Guest are viewing this topic.

Offline loefflerchuck

  • Member
  • Posts: 1,127
    • www.heartwoodbows.com
Re: Incense cedar
« Reply #15 on: March 13, 2012, 02:26:17 pm »
Mike, give em a try and see if they work. I made a few bows from trunk wood and they worked fine but the bows pictured are limbs. The upper half with natural reflex. I shape the bow right after cutting the wood and sinew back em a week later 3-4 layers and usually another layer after the tiller. I get em bending before the wood dries out too much just like the Miwok did. I figure hundreds of years building these bows they knew how to do it. They still shoot great so far after 3-4 years. The wood gets brittle when too dry. I grease the wood till it will take no more
 These trees grow in spots around California but are thickest in the sierras. East side of the range. They get quite large and live a long time. branches from big trees work the best. Google Incense cedar for more info.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Incense cedar
« Reply #16 on: March 13, 2012, 02:43:47 pm »
Wow, look at the bend on those!!!!

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Incense cedar
« Reply #17 on: March 13, 2012, 03:19:01 pm »
Wow, that cedar must have some serious compression traits to take that bend and that much sinew!!  Amazing!

George
St Paul, TX