Author Topic: Mullberry layout?  (Read 1394 times)

0 Members and 1 Guest are viewing this topic.

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Mullberry layout?
« on: March 04, 2012, 08:12:11 am »
What design layout would be best using a mullbarry stave.  I want to make a bow between 62 and 66 NTN and end up with a 45lb at 26 inch draw?

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Mullberry layout?
« Reply #1 on: March 04, 2012, 10:16:32 am »
I like ol' reliable when all else fails Chuck. 63" ntn, 8" riser, 1 3/4" wide out 12" from the fades and tapered to 1/2" knocks. 
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Mullberry layout?
« Reply #2 on: March 04, 2012, 11:01:20 am »
I think you can treat mulberry similar to black locust. Remove the sapwood, and follow a similar design.
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Mullberry layout?
« Reply #3 on: March 04, 2012, 11:15:39 am »
My last mulberry bow is 64" long. 1-5/8" wide to midlimb then tapered down to 7/16" wide tips. The tips are flipped just a little. Mulberry makes a fine bow.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Mullberry layout?
« Reply #4 on: March 04, 2012, 12:28:38 pm »
10% bigger than osage.  Pearlie and Dean have a good start although I think 6' to 8" out from the fades before tapering to the tips. Either will work, theirs are probably safer designs.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Re: Mullberry layout?
« Reply #5 on: March 04, 2012, 02:05:08 pm »
Thanks for the replies and help everyone.