« previous next »
Pages: [1]

Author Topic: butt joining bamboo for bow core?  (Read 2138 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
butt joining bamboo for bow core?
« on: February 28, 2012, 05:20:34 pm »
Well I lost my source for 72" verticle grain carmelized bamboo flooring. 

I want to try and make a bamboo cored ELB looking thing. Fantasy bow.

What is the best way to join the short boards in the middle?

I consider making my favorite R/D bow as a tri lam with bamboo core and hickory belly also. 
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: butt joining bamboo for bow core?
« Reply #1 on: February 28, 2012, 05:59:23 pm »
Im saying scarf.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: butt joining bamboo for bow core?
« Reply #2 on: February 28, 2012, 06:30:51 pm »
DEFINITELY a scarf joint of some variety.  A butt joint would certainly blow apart under the strain.  You might ought to look into a very long or sharp angled finger joint.
Logged

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: butt joining bamboo for bow core?
« Reply #3 on: February 28, 2012, 08:34:04 pm »
What is a scarf joint?
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: butt joining bamboo for bow core?
« Reply #4 on: February 28, 2012, 08:36:14 pm »
like this...
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: butt joining bamboo for bow core?
« Reply #5 on: February 29, 2012, 02:42:07 am »
Ahh...

that will take me up to 68" bows but what about an ELB type thing?  Can you have two joints about center..... with flexing going on there?
Logged
Pages: [1]
« previous next »