« previous next »
Pages: 1 [2]

Author Topic: Is it fixable? Or well Carved firewood?  (Read 3735 times)

0 Members and 1 Guest are viewing this topic.

Offline DRon knife

  • Member
  • Posts: 202
Re: Is it fixable? Or well Carved firewood?
« Reply #15 on: February 22, 2012, 09:33:01 pm »
google it,you'll find a lumber supply nearby...especially in ct :)   Were you trying to bend 3/4" stock?? If so the run off wasn't going to be your only issue...maybe to thick,pics can be deceiving tho!!

 Gl on your wood search and maybe think Hickory(shes awful forgiving),Ron
Logged

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: Is it fixable? Or well Carved firewood?
« Reply #16 on: February 22, 2012, 09:48:23 pm »
No she was about 1/2 thick at that point, probably pulling 50ish pounds at full draw which for me is about 27" for the couple times i shot her it was pretty strong, put an arrow almost all the way through my target :D but I have bow 2 getting the Riser glued on so i should be able to start work on that tomorrow.
Logged

Offline MoNative

  • Member
  • Posts: 131
Re: Is it fixable? Or well Carved firewood?
« Reply #17 on: February 23, 2012, 01:03:28 am »
That stinks but it happens. I have started 5 board bows and finished 1 that was pretty good. Finding I good piece is a jo in its own.
Logged
Jesus is the way, the truth, and the light. He is our rock of ages, our everlasting arms.

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Is it fixable? Or well Carved firewood?
« Reply #18 on: February 23, 2012, 01:59:01 pm »
15DLongbow - I dont live all that far from you.  If you want to take a trip, and would like to try working on a stave, I would be happy to give you one to work on if you come for a visit.  PM if you are interested.

Russ   
Logged
Pages: 1 [2]
« previous next »