Author Topic: Vine Maple Beast...draw pics pg4  (Read 12587 times)

0 Members and 1 Guest are viewing this topic.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Vine Maple Beast
« Reply #45 on: February 11, 2012, 08:35:54 pm »
  In my 21 years of bow builtding. I've cut dozzens and dozzens of OSAGE TREES. And had 100's of osage staves. Don't need any vine maple but would trade some OSAGE for some yew staves. No limbs but staves. Big enough for simi-recurve handle. No use for bendy handle wood.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast
« Reply #46 on: February 11, 2012, 08:40:50 pm »
Don't need any vine maple

yah sure? its fun stuff
Clatskanie, Oregon

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Vine Maple Beast
« Reply #47 on: February 11, 2012, 09:01:59 pm »
  All I've made a few vine maple bows. Have one all ready simi cut out to start now later this spring. I got the stave from elk tracker.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast
« Reply #48 on: February 13, 2012, 05:05:05 pm »
linen backing is my new favorite (never done it before....its nice)
Clatskanie, Oregon

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast
« Reply #49 on: February 14, 2012, 05:40:19 pm »
There's a little bit of twist in the lower limb but she shoots just fine.


Here's a pics for all the doubters  ;D

Had to lower the weight to #55@26"

Just before I start putting finish on.

 

 
Clatskanie, Oregon

Offline rps3

  • Member
  • Posts: 1,514
Re: Vine Maple Beast...draw pics pg4
« Reply #50 on: February 14, 2012, 06:20:24 pm »
That looks very cool. I can see why you were concerned about the twist, your string might just fly off if things werent lined up perfect. How skinny are you going to go with the tips?

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast...draw pics pg4
« Reply #51 on: February 14, 2012, 06:43:06 pm »
That looks very cool. I can see why you were concerned about the twist, your string might just fly off if things werent lined up perfect. How skinny are you going to go with the tips?

String stays on pretty good. I'm gonna take her down to about 1/2" or so.
Clatskanie, Oregon

Offline zdogk9

  • Member
  • Posts: 44
Re: Vine Maple Beast...draw pics pg4
« Reply #52 on: February 14, 2012, 07:13:21 pm »
Put string bridges on it, to remove any chance of it reversing. I don't think there ever was very much yew in the Clatsop, Tillamook, or Columbia county area. Really fine looking bow by the way

Offline Keenan

  • Member
  • Posts: 4,824
Re: Vine Maple Beast...draw pics pg4
« Reply #53 on: February 14, 2012, 10:05:40 pm »
That came out very nice. Congratulations

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast...draw pics pg4
« Reply #54 on: February 14, 2012, 10:07:25 pm »
Put string bridges on it, to remove any chance of it reversing. I don't think there ever was very much yew in the Clatsop, Tillamook, or Columbia county area. Really fine looking bow by the way

theres quite a bit in vernonia. ive seen 1 other in clatsop county most are at the higher elevations where logging doesnt happen. ive planted some around the families properties and stuff. but ive never cut down a yew. i have pulled staves from the side of trunks.


do you live close?

Clatskanie, Oregon

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Vine Maple Beast...draw pics pg4
« Reply #55 on: February 14, 2012, 11:35:32 pm »
Bryce that turned out great! Well done looks sweet! Next time I get out that way I will have to let you know aheaad of time so we can hook up and chat maybe do some stump shooting or go harvest some VM.

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast...draw pics pg4
« Reply #56 on: February 15, 2012, 01:16:19 am »
Bryce that turned out great! Well done looks sweet! Next time I get out that way I will have to let you know aheaad of time so we can hook up and chat maybe do some stump shooting or go harvest some VM.

Josh

That would be killer dude. I'm heading that way in April for spring bear at myrtle point maybe ill stop by :D
Clatskanie, Oregon

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Vine Maple Beast...draw pics pg4
« Reply #57 on: February 15, 2012, 01:39:25 am »
Mirtle point is quite a ways away from me I think? But if you come through Tillamook let me know.

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Vine Maple Beast...draw pics pg4
« Reply #58 on: February 15, 2012, 02:57:06 am »
you got it.
Clatskanie, Oregon

Offline zdogk9

  • Member
  • Posts: 44
Re: Vine Maple Beast...draw pics pg4
« Reply #59 on: February 16, 2012, 08:56:08 pm »
Grew up in Manhattan Beach, live in Pacific County now