« previous next »
Pages: [1] 2

Author Topic: recurve jig  (Read 6071 times)

0 Members and 2 Guests are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
recurve jig
« on: February 11, 2012, 04:47:36 pm »
I seem to be interested in recurves these days. Mostly yew, because it responds so well to dry heat. I have 2 on the go at the moment, and I'll post the results asap. I built this jig, and I thought I'd share.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: recurve jig
« Reply #1 on: February 11, 2012, 04:51:10 pm »
I built it by gluing two 3/4" sheets of plywood together, then shaping the curve and drilling the clamping holes. When I first started using it, the heat was scorching the wood. So, I applied a copper sheet on the top, and hammered it into shape. Works great now... no scorching, and the copper transmits the heat back up into the limb, making the heat more effective.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: recurve jig
« Reply #2 on: February 11, 2012, 04:55:06 pm »
This pic shows the one tip already flipped. I also use the jig for heat tempering the belly, and it works fantastic.
Logged

Offline bcbull

  • Member
  • Posts: 541
Re: recurve jig
« Reply #3 on: February 11, 2012, 04:55:33 pm »
nice jig bro i like that never thought about the copper thats a good idea tho might have to pick some copper up at work put it on mine brock
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: recurve jig
« Reply #4 on: February 11, 2012, 05:07:17 pm »
Hot jiggity!  Nice.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline dwardo

  • Member
  • Posts: 1,456
Re: recurve jig
« Reply #5 on: February 11, 2012, 05:14:08 pm »
Quote from: JW_Halverson on February 11, 2012, 05:07:17 pm
Hot jiggity!  Nice.


Oooo thats bad,  :laugh:
Nice jig indeed.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: recurve jig
« Reply #6 on: February 11, 2012, 06:10:00 pm »
Nice recurve form. Be careful with the copper that you don't reflect heat off the copper and scorch the bows back. I used aluminum foil on one of my forms once and ruined the bow by unknowingly scroching the back While heating the back and sides.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mangeur de lard

  • Member
  • Posts: 102
  • Wildlife biologist and arborist
Re: recurve jig
« Reply #7 on: February 11, 2012, 06:11:16 pm »
Nice profile. Good thinking on the copper sheet, I did the same on my caul this afternoon with aluminum foil. It does seem to heat the underside of the limb better doesn't it?

Oh, and don't forget to sweep up those shavings, that shop is a mess! ;D

Just saw your reply Pat, hope my bow's back is not charred!
Logged
Quebec, Canada

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: recurve jig
« Reply #8 on: February 11, 2012, 06:45:08 pm »
Quote from: dwardo on February 11, 2012, 05:14:08 pm
Quote from: JW_Halverson on February 11, 2012, 05:07:17 pm
Hot jiggity!  Nice.


Oooo thats bad,  :laugh:
Nice jig indeed.

Better than "Gettin' jiggy wit' it!"
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline dwardo

  • Member
  • Posts: 1,456
Re: recurve jig
« Reply #9 on: February 11, 2012, 07:28:03 pm »
Quote from: JW_Halverson on February 11, 2012, 06:45:08 pm
Quote from: dwardo on February 11, 2012, 05:14:08 pm
Quote from: JW_Halverson on February 11, 2012, 05:07:17 pm
Hot jiggity!  Nice.


Oooo thats bad,  :laugh:
Nice jig indeed.

Better than "Gettin' jiggy wit' it!"

Nooooooo......
But i fear you have more to come.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: recurve jig
« Reply #10 on: February 11, 2012, 10:14:50 pm »
I did try the alum foil, and it did scorch easily. The copper seems to heat much slower, and distribute the heat more evenly. I haven't had any problems with toasting the back so far.
Logged

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: recurve jig
« Reply #11 on: February 12, 2012, 01:15:00 am »
Cool beans Adam.  Looks like I might have to stop by some time while you put on a clinic  ;) ;D
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: recurve jig
« Reply #12 on: February 12, 2012, 01:15:55 am »
If it will warm the the back without scorching it is a great idea.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DRon knife

  • Member
  • Posts: 202
Re: recurve jig
« Reply #13 on: February 12, 2012, 01:52:06 am »
Nice jig!! I haven't heated anything yet so I'm flying blind here,but if the copper fails(hope it don't) They make rated plywood and 2x stock.GL,Ron
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: recurve jig
« Reply #14 on: February 12, 2012, 03:55:47 pm »
Quote from: dwardo on February 11, 2012, 07:28:03 pm
Quote from: JW_Halverson on February 11, 2012, 06:45:08 pm
Quote from: dwardo on February 11, 2012, 05:14:08 pm
Quote from: JW_Halverson on February 11, 2012, 05:07:17 pm
Hot jiggity!  Nice.


Oooo thats bad,  :laugh:
Nice jig indeed.

Better than "Gettin' jiggy wit' it!"

Nooooooo......
But i fear you have more to come.

The jig is up, the Pun Police are here, RUN!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: [1] 2
« previous next »