« previous next »
Pages: [1]

Author Topic: ash propeller twist  (Read 1319 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt A

  • Member
  • Posts: 123
ash propeller twist
« on: February 10, 2012, 01:41:09 am »
I have 2 ash staves i'm trying to make pyramid bows out of and the first I am attempting, one limb twists one way and the other the other way. Tried heating with my gun and twisting/holding for extended amounts of time to have them retract to their original position. any suggestions?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: ash propeller twist
« Reply #1 on: February 10, 2012, 08:51:21 am »
Rough them down to bow size and try again.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: ash propeller twist
« Reply #2 on: February 10, 2012, 11:29:10 am »
Boil them !
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: ash propeller twist
« Reply #3 on: February 10, 2012, 12:08:51 pm »
Some wood just doesn't want to be straightened.
It is possible to just leave twist and tiller it to still draw back in a straight line.
It requires enough width to adjust the string line as the tiller ing progresses and a fair bit of luck/patience/skill but sometimes it's just easier to let the wood bend in the direction it wants and to build the bow around that.
The character in the end result will also be well worth the effort if you succeed. I don't guarantee it will impress the girls tho' ::)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: ash propeller twist
« Reply #4 on: February 10, 2012, 12:30:42 pm »
I would do what Pearl said,maybe rub it down with cooking oil and over bend it
about 1/2 again of what you want. :) If that don't work the what Del said will also work if it isn't so bad that the string won't stay on.  :) :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: ash propeller twist
« Reply #5 on: February 10, 2012, 01:28:19 pm »
I'd wait until first low bracing and see how the string lines up. A little twist won't hurt anything plus you can tiller out the twist so the limbs lay straight at full draw where it most important.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Matt A

  • Member
  • Posts: 123
Re: ash propeller twist
« Reply #6 on: February 10, 2012, 03:48:17 pm »
ok i'll try the oil first cause i didn't apply that before and go from there
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: ash propeller twist
« Reply #7 on: February 10, 2012, 03:57:52 pm »
Is this truley a stave or a bow blank?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1]
« previous next »