I'm currently working on an osage bow that's around 64" long.....Well, I got the brace height to around 5 inches and drawn out to about 23 inches, and it lifted a split on the side between the fades and mid limb. I tamed the splinter which narrowed the limb down to 7/8 inch wide. Is that too narrow for a bow 64 inches long? Will I need to make all the limb 7/8th inch wide to mid limb? I'm hoping to salvage this one.....it has the potential to be the nicest one I've ever made for sure. Just didn't know if narrowing it that much would be acceptable. I'm looking to bring the bow in at about mid to upper 40lb range. Any help would be greatly appreciated. Thanks!