« previous next »
Pages: [1]

Author Topic: Oregon Chain Saw Sharpener  (Read 3825 times)

0 Members and 1 Guest are viewing this topic.

Offline Bevan R.

  • Member
  • Posts: 1,691
Oregon Chain Saw Sharpener
« on: February 05, 2012, 09:41:47 pm »
I no longer cut firewood so I do not need this. I thought I would try it here for trades before I put it on the auction site.

It is an Oregon Chainsaw Sharpener. Model 511A.
There is a 1/4" flattening wheel on it now. Included is 1 - 1/8" round wheel and 2 - 3/16" round wheels. Manuals & dressing stone.
I still have the receipt for this. It cost me $275.00
I am looking for bow wood, and knappables. But I will entertain any offer.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Oregon Chain Saw Sharpener
« Reply #1 on: February 05, 2012, 09:42:14 pm »
Additional Pics...
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Oregon Chain Saw Sharpener
« Reply #2 on: February 05, 2012, 10:15:28 pm »
Bevan I'm interested in this!!  Pm on the way
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Oregon Chain Saw Sharpener
« Reply #3 on: February 05, 2012, 11:14:46 pm »
Trade in progress. 8)
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Lone500

  • Member
  • Posts: 124
Re: Oregon Chain Saw Sharpener
« Reply #4 on: February 06, 2012, 01:07:59 am »
i love those things. when you wana get a chain sharp and dont have time to screw around  :)
Logged
Leon      Saluda, NC

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Oregon Chain Saw Sharpener
« Reply #5 on: February 06, 2012, 01:11:24 am »
Quote from: Lone500 on February 06, 2012, 01:07:59 am
i love those things. when you wana get a chain sharp and dont have time to screw around  :)

I would agree. I would have at least 6 chains and would wait until they all needed sharpening, then sit down in the shop and run through them all.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Oregon Chain Saw Sharpener
« Reply #6 on: February 06, 2012, 05:52:50 pm »
OK, It is available again.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Eric Krewson

  • Member
  • Posts: 5,417
Re: Oregon Chain Saw Sharpener
« Reply #7 on: February 07, 2012, 01:59:46 am »
Don't know if you need any wild turkey feathers but I have many hundreds, full length, L/W with the bases ground by Raven arrows. Would be very generous with my feathers on a trade.

I can come up with a lot of hickory bow blanks as well but they have only been cut for about 6 months.
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,417
Re: Oregon Chain Saw Sharpener
« Reply #8 on: February 07, 2012, 11:04:28 am »
Did a little checking. How about 2 hickory bow blanks, one seasoned, very nice osage bow blank ( some nice snakey spots in the limbs) with tip over lays glued on and 200 feathers ready to chop or burn to shape for the sharpener.
Logged

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Oregon Chain Saw Sharpener
« Reply #9 on: February 08, 2012, 01:20:20 pm »
I am interested.
Sent you a PM.

David
Logged
David Key / N.W. Alabama

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Oregon Chain Saw Sharpener
« Reply #10 on: February 08, 2012, 04:01:41 pm »
Sorry, it has been traded.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: [1]
« previous next »