« previous next »
Pages: 1 [2]

Author Topic: New here and working on my first bow.  (Read 8466 times)

0 Members and 2 Guests are viewing this topic.

Offline chasing crow

  • Member
  • Posts: 269
Re: New here and working on my first bow.
« Reply #15 on: February 05, 2012, 12:25:49 pm »
I've backed 2 oak board bows using burlap bags and titebond 3 with good results. I really like the look, it kind of breaks up the profile. I have hunted all winter (with no luck) and every thing has held up well in all weather.
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #16 on: February 05, 2012, 04:58:03 pm »
Burlap? I actually like that idea. And i think i might have a 25'x10' laying around. And titebond 2 should be fine right?
Logged

Offline chasing crow

  • Member
  • Posts: 269
Re: New here and working on my first bow.
« Reply #17 on: February 06, 2012, 09:43:43 am »
Titebond 3 is waterproof. I hunt in a lot of wet weather so I opted for the 3. Not a good pic but here is my new hunting bow with burlap.
« Last Edit: February 06, 2012, 02:23:21 pm by chasing crow »
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #18 on: February 06, 2012, 03:12:44 pm »
that doesnt look too bad, Hopefully ill post up pics up by the end of today..  I had a we bit of a screw up so im set back a day or so but it should be back on track soon.
Logged

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #19 on: February 10, 2012, 05:15:06 pm »
Heres the progress so far, Static limbs are finished and just working on shaving down the working limbs before i get it on the Tiller.
 Also, I should apply the backing before i Tiller it right?
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: New here and working on my first bow.
« Reply #20 on: February 10, 2012, 05:23:38 pm »
Nice pic.  Those are some pretty narrow static tips.  Are they thick enough to stay tough?  Side view might help...
Logged

Offline k-hat

  • Member
  • Posts: 1,058
Re: New here and working on my first bow.
« Reply #21 on: February 10, 2012, 05:27:13 pm »
Since it's not a working back, it's kind of up to you.  If you think the bow might lift a splinter or worse, blow, in tiller then back it before.  I've backed one after, another in the middle, both good results.
Logged

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #22 on: February 10, 2012, 05:34:13 pm »
The static limbs start at 3/4" at the base and narrow out to 1/2" at the tips While being 3/4" thick throughout, Me lightly bending the bowlimb so far doesnt seem to show any bend throughout the static limb. also, whats the best way to evenly remove wood from the working limbs? I'm using a surform but not sure if there is a better way.

Edit: The static limbs might look extra Narrow cause i Kept the working limbs wide at 2.5"
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: New here and working on my first bow.
« Reply #23 on: February 10, 2012, 05:45:49 pm »
I like my shinto rasp, but as you get down to the finer stuff I prefer a furniture scaper.
« Last Edit: February 10, 2012, 05:50:13 pm by Onebowonder »
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,083
  • }}}--CK-->
Re: New here and working on my first bow.
« Reply #24 on: February 10, 2012, 06:01:15 pm »
Those run outs are gonna kill that board. You are going to have to back it if you want to bend it. I suggest hickory.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: New here and working on my first bow.
« Reply #25 on: February 10, 2012, 06:10:16 pm »
I have to disagree Pearly, I have made unbacked bows from boards with worse grain than that (but the picture is blurry so it may be worse than what i think it is).  However I am nervous that the bow will end up failing, from compression instead of tension however. I made an oak molle with a perfect tiller last summer and withing a 1000 shots it chrysaled terribly throughout the entire limb... This design is just not well suited for red oak. However mine was shorter than yours so yours may have a chance...  I would definitely NOT back that board with hickory, because this will increase the compression strain on the limbs, making them even more likely to chrysal. Good luck.

Jon
Logged

Offline Josh B

  • Member
  • Posts: 3,741
Re: New here and working on my first bow.
« Reply #26 on: February 10, 2012, 06:22:30 pm »
Is that pic of the back or belly?  Josh
Logged

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #27 on: February 10, 2012, 07:12:25 pm »
back, and i plan on taking chasing crows Idea and Im backing it with Burlap.
Logged

Offline Josh B

  • Member
  • Posts: 3,741
Re: New here and working on my first bow.
« Reply #28 on: February 10, 2012, 07:55:50 pm »
Quote from: 15DLongbow on February 10, 2012, 07:12:25 pm
back, and i plan on taking chasing crows Idea and Im backing it with Burlap.

That would be a good idea.  Those run-offs would be a problem,  especially in a Molly.  Josh
Logged

Offline 15DLongbow

  • Member
  • Posts: 43
  • I pretend to know what I'm doing.
Re: New here and working on my first bow.
« Reply #29 on: February 10, 2012, 08:03:22 pm »
Yeah, I knew they were gonna be trouble from the beginning, if it blows then atleast I'll get some practice in right? Sadly that was the best piece i could find around here haha


Update: 2-11 I got the limbs down to the right thickness and the backing is clamped and drying. I took the day to make a Tillering tree for it, a couple 2x4's and some screws and i was done. all i have left to do on the bow is cut the nocks and start my first attempt at tillering.
« Last Edit: February 12, 2012, 12:29:55 am by 15DLongbow »
Logged
Pages: 1 [2]
« previous next »