« previous next »
Pages: [1]

Author Topic: Sinew Sanding  (Read 1725 times)

0 Members and 1 Guest are viewing this topic.

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
Sinew Sanding
« on: January 25, 2012, 12:36:36 pm »
I keep seeing people saying that they sanded down their sinew backed bows before putting rawhide or snakeskins on them. So that doesn't hurt the strength of the sinew backing at all does it? Explain it to me please.
Logged
Plays With Bow and Arrow

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Sinew Sanding
« Reply #1 on: January 25, 2012, 12:55:09 pm »
You can sand it,I always sand in one direction and just enough to smooth the humps or high spots out. No , it won't hurt if if you don't get carried away. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Sinew Sanding
« Reply #2 on: January 25, 2012, 02:23:09 pm »
Sanding the sinew before backing is OK.  Sanding sinew and then not backing it is risky.  Filling in the low spots with layers of glue is safer.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline WolfPupTee

  • Member
  • Posts: 167
  • You don't understand what I'm doing, but I do.
    • The Artis Den
Re: Sinew Sanding
« Reply #3 on: January 25, 2012, 02:49:10 pm »
Thanks!
Logged
Plays With Bow and Arrow
Pages: [1]
« previous next »