« previous next »
Pages: [1] 2

Author Topic: Arrow wrenches  (Read 8739 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Arrow wrenches
« on: December 28, 2011, 01:29:27 pm »
  After reading Kay Koppedrayer's article on straightening cane arrows in the newest PA I decided to give them a try. Below is my arrow making kit. The arrow wrenches I previously made have a tendancy to indent the hot shaft while straightening. I generally only use an arrow wrench for bad kinks in the shaft or near the end where I can't get good leverage...


  After reading the article I decided to make a few of the type of arrow wrenches they used. I made two, one osage(probably too hard) and the other ERC. You will note the releaved areas on opposite ends and opposite sides of the cutout. These should prevent the maring or denting of the hot shafts. I haven't tried them yet but will give them a goo check out when arrow making time gets here.






Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline artcher1

  • Member
  • Posts: 1,114
Re: Arrow wrenches
« Reply #1 on: December 28, 2011, 01:41:05 pm »
Nice tools Pat! I don't use anything like that myself, mostly burnish mine straight using an old insulator.
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Arrow wrenches
« Reply #2 on: December 28, 2011, 01:43:34 pm »
I was looking at that article and thinking that those could be usefull for shafting other that just bamboo. Have any of you SHOOT shaft makers used anything like this?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Arrow wrenches
« Reply #3 on: December 28, 2011, 01:55:02 pm »
Pat I have one similar to those you made. Knightd made it for me a couple years ago. It works great, but does have a tendency to dent the shaft if put in a bind.
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Arrow wrenches
« Reply #4 on: December 28, 2011, 01:57:18 pm »
You mean one of these, Art?


Bevan, I rarely use a wrench for straightening shafts but in some situations, with sharp bends or at the end of the shaft where I can't get leverage I will use one. All of my arrows are either cane or hardwood shoots so these tools come in handy when needed.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline artcher1

  • Member
  • Posts: 1,114
Re: Arrow wrenches
« Reply #5 on: December 28, 2011, 02:20:08 pm »
That's it Pat.
Logged

Offline artcher1

  • Member
  • Posts: 1,114
Re: Arrow wrenches
« Reply #6 on: December 28, 2011, 02:23:41 pm »
Forgot to mention, heat the shaft, lay on a flat surface with the high side up and burnish away. You won't kink anything using this method.
Logged

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Arrow wrenches
« Reply #7 on: December 28, 2011, 02:25:49 pm »
Thanks for the post Pat.  Looks simple enough, I'll have to give it a try.  I been wearing gloves.
Logged
(:::.)    Osage music played daily. :)

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Arrow wrenches
« Reply #8 on: December 28, 2011, 02:42:59 pm »
 ;D
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Arrow wrenches
« Reply #9 on: December 28, 2011, 02:57:18 pm »
Patrick, I always wondered how you got your arrows straight. If you use it between your teeth you will mar them less!  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Arrow wrenches
« Reply #10 on: December 28, 2011, 04:24:21 pm »
I need to lose a few more teeth first...hahah
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Arrow wrenches
« Reply #11 on: January 01, 2012, 04:06:06 pm »
   I just bend between my thumbs or use my knee no kinks this way. I rarely use a wrench when it comes to heating I barnish my shafes. Barnishing takes out kinks. If it's so bad I can take it out by barnishing I uselly don't cut it..
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline tenbrook

  • Member
  • Posts: 132
Re: Arrow wrenches
« Reply #12 on: January 04, 2012, 11:32:33 am »
Quote from: artcher1 on December 28, 2011, 01:41:05 pm
Nice tools Pat! I don't use anything like that myself, mostly burnish mine straight using an old insulator.

Could someone explain this process to me?

thanks

tenbrook
Logged
"Indian makes small fire, sits close.
White man makes big fire, sits far away."
 
- Stalking Wolf

Offline artcher1

  • Member
  • Posts: 1,114
Re: Arrow wrenches
« Reply #13 on: January 04, 2012, 12:59:39 pm »
It's a simple procedure Tenbrook. Heat the area to be straightened, and using some type of burnishing tool, burnish that area with the high side up. You're compressing the fibers on the high side and stretching the fibers on the reverse side........Art
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Arrow wrenches
« Reply #14 on: January 04, 2012, 07:02:51 pm »
This is the way I straighten reed.  I use my hands (with gloves on) and also an arrow wrench.  The same basic principles apply to straightening shoots and cane also.

http://www.youtube.com/watch?NR=1&feature=endscreen&v=rd4aWsvcOnk
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
Pages: [1] 2
« previous next »